Avalux 28kW Inverter Heat Pump

Avalux 28kW Inverter Heat PumpSingle-phase, right at the top of what one phase will carry.27.7kW on a single-phase supply is about as far as one phase sensibly goes, and this is the unit that does it. Max run current is 20.8 amps, so it wants its own circuit and a sparky who reads the manual. For a large pool without three-phase available, there is not much else that gets you here.Features Full DC inverter compressor and fan - runs long and slow instead of cycling R32 refrigerant, lower global warming potential than R410A Heating and cooling, with an operating range down to -7C Titanium heat exchanger with a 40mm water connection IPX4 rated for outdoor installation Digital controller with water temperature display Specifications Specification AL28 Unit Heating capacity (air 27C / water 26C) 4.6 ~ 27.7 kW Consumed power (air 27C / water 26C) 0.36 ~ 4.0 kW COP (air 27C / water 26C) 16.3 ~ 6.7 Heating capacity (air 15C / water 26C) 5.8 ~ 20.5 kW Consumed power (air 15C / water 26C) 0.7 ~ 4.0 kW COP (air 15C / water 26C) 8.0 ~ 5.1 Cooling capacity (air 35C / water 29C) 5.5 ~ 13.4 kW Consumed power (air 35C / water 29C) 1.66 ~ 4.62 kW EER (air 35C / water 29C) 3.3 ~ 2.9 Operating air temperature -7 ~ 43 C Refrigerant R32 IPX rating IPX4 Airflow 5035 m3/h Sound pressure at 1m 45 ~ 58 dB(A) Net dimensions (L x W x H) 1160 x 490 x 862 mm Shipping dimensions (L x W x H) 1210 x 510 x 880 mm Net / shipping weight 100 / 117 kg Power supply 240/1/50 V/Ph/Hz Max run current (per phase) 20.8 A Fan direction Horizontal Fan quantity 1 Fan rotate speed 400 ~ 800 RPM Water connection 40 mm Water flow volume 110 L/min Water pressure drop (max) 17 kPa Installation must be carried out by a licensed electrician and, where required, a licensed plumber.