GT-LX431SE - Launch X431 PRO3 SE Professional Car Diagnostic Scanner

The GT-LX431SE - LAUNCH X-431 PRO3 SE is a professional 10.1-inch full-system automotive diagnostic scanner designed for workshops, diagnostic technicians and auto electricians. It provides OE-level diagnostic functions, bi-directional control, ECU coding, CAN FD and DoIP support, 39 service functions and extensive multi-brand vehicle coverage. Powered by the DBSCare VII VCI, the X-431 PRO3 SE supports more than 110 vehicle manufacturers across European, Asian and American markets. Bluetooth provides convenient wireless diagnostics, while USB wired communication offers a fast and stable connection for advanced operations such as coding. Key Features & Benefits 110+ Vehicle Manufacturers: Full-system diagnostic coverage across European, Asian and American vehicle brands, with vehicle coverage continuously updated by LAUNCH. Full-System Diagnostics: Access supported vehicle systems for fault finding, including reading and clearing DTCs, live data and system-level diagnostic functions. Bi-Directional Control: Command supported components directly from the scanner to perform active tests and verify component operation. ECU Coding: Perform supported ECU coding and vehicle-specific configuration procedures. 30,000+ VW and Audi Guided Functions: Extensive guided functionality for supported Volkswagen and Audi diagnostic and repair procedures. CAN FD Support: Communicate with newer vehicles using the high-speed CAN FD diagnostic protocol. DoIP Support: Supports Diagnostics over Internet Protocol on compatible vehicles. An additional DoIP cable is required. 39 Service Functions: Provides a broad selection of reset, relearn, calibration and maintenance functions for compatible vehicles. Remote Diagnosis: Supports LAUNCH remote diagnostic functionality for compatible applications. Wireless and Wired Diagnosis: Use Bluetooth for convenient wireless diagnostics or USB wired communication for advanced operations such as coding. Diagnostic History: Access previous diagnostic reports directly from the tablet. Built-In Repair Information: Provides repair information and training videos to assist with diagnostic and repair procedures. Info Center: Provides access to vehicle repair information and the latest available updates. Expandable Platform: Compatible additional diagnostic capabilities and specialist modules can be added as workshop requirements grow. Professional Full-System Diagnostics The LAUNCH X-431 PRO3 SE provides comprehensive diagnostic functionality across supported vehicle control systems. Diagnostic Function Description Read DTCs Retrieve diagnostic trouble codes from supported electronic control modules. Clear DTCs Clear stored fault codes after diagnosis and repair. Live Data View real-time ECU data streams to analyse vehicle operation. Bi-Directional Tests Command supported components and systems directly from the diagnostic tablet. ECU Coding Perform supported coding and configuration procedures. Remote Diagnosis Access supported remote diagnostic functionality. OBDII Diagnostics Perform comprehensive OBDII diagnostic functions. Bi-Directional Active Testing Bi-directional control allows the X-431 PRO3 SE to send commands directly to supported vehicle systems and components. This allows technicians to actively test component operation rather than relying only on fault codes and live data. Available active tests depend on the specific vehicle make, model, year and control module. ECU Coding The LAUNCH X-431 PRO3 SE supports advanced ECU coding functions on compatible vehicles. USB wired communication can be used where a fast and stable connection is preferred for advanced operations such as coding. Coding functionality varies according to the vehicle manufacturer, model, year and ECU. 30,000+ Guided Functions for Volkswagen and Audi The PRO3 SE supports more than 30,000 guided functions for Volkswagen and Audi, providing technicians with step-by-step assistance for supported diagnostic, service and repair procedures. This functionality is designed to assist workshops working with supported Volkswagen and Audi vehicles while the scanner continues to provide multi-brand diagnostic coverage. 39 Service Functions The X-431 PRO3 SE supports 39 advanced service, reset, relearn and calibration functions for compatible vehicles: Brake Reset Oil Maintenance Reset Steering Angle Reset Battery Matching ABS Bleeding Throttle Relearn TPMS Reset Database DPF Regeneration Air Suspension Calibration Adaptive Front Lighting Reset AdBlue Reset Air/Fuel Reset Air Level Calibration Coolant Bleeding Crank Position Sensor Relearn EGR Adaptation Engine Power Balance Monitoring Gas Particulate Filter Regeneration Gearbox Relearn High-Voltage Battery Diagnostics IMMO Programming Immobiliser Reset Injector Coding Intelligent Cruise Control System Language Change Motor Angle Calibration NOx Sensor Reset Seat Occupancy Calibration Stop/Start Reset Sunroof Reset Tyre Reset Transport Mode Windows Calibration Turbocharging Matching ECU Reset FRM Reset Clutch Matching ODO Check RESETMSVIN Important: Available service functions vary according to vehicle make, model, year and installed systems. CAN FD and DoIP Support The DBSCare VII VCI supports modern vehicle communication protocols including CAN, CAN FD and DoIP, extending diagnostic capability to compatible newer vehicle platforms. DoIP Note: An additional DoIP cable is required for DoIP communication. Diagnostic History and Repair Information The PRO3 SE supports the complete diagnostic workflow with features designed to assist technicians during diagnosis and repair. Diagnostic History: Review previous diagnostic reports directly from the tablet. Info Center: Access vehicle repair information and the latest available updates. Repair Information: Built-in repair resources help technicians investigate faults. Training Videos: Built-in training content provides additional assistance during diagnosis and repair. Vehicle Coverage: Check supported vehicle coverage directly through the LAUNCH platform. Technical Specifications Specification Details Operating System Android 10.0 Display 10.1-inch sunlight-readable Gorilla Glass screen Resolution 1280 x 800 CPU 2.0GHz Quad-Core RAM 4GB Storage 64GB Battery 47.88Wh, 7.6V, 6300mAh Rear Camera 8MP VCI DBSCare VII VCI Connection Bluetooth and USB wired Communication Protocols CAN, CAN FD, DoIP and other supported protocols USB Interface 1x Type-A and 1x Type-C Dimensions 274 x 190.5 x 40.5mm Vehicle Compatibility The LAUNCH X-431 PRO3 SE provides full-system diagnostic coverage for more than 110 vehicle manufacturers across European, Asian and American markets, with LAUNCH continuously updating vehicle coverage. Exact diagnostic functions, ECU coding, bi-directional tests, guided functions and service functions depend on the vehicle manufacturer, model, year, ECU and regional specification. Compatible Add-Ons and Expansion Modules The X-431 PRO3 SE is an expandable diagnostic platform. Compatible LAUNCH accessories and modules can be added to extend its capabilities according to workshop requirements. The following are optional expansion products and are not included with the standard PRO3 SE unless specifically stated: LAUNCH VSP-600 Videoscope: Adds visual inspection capability for difficult-to-access vehicle components. LAUNCH O2-2 Oscilloscope: Adds automotive waveform and electrical signal analysis. LAUNCH S2-2 SensorBox: Adds vehicle sensor testing, signal measurement and sensor simulation functionality. LAUNCH X-431 Key Programmer: Expands supported key, transponder and immobiliser functionality. LAUNCH X-431 TSGUN: Adds compatible TPMS sensor activation, programming and diagnostic functionality. LAUNCH BST360 Battery Tester: Adds wireless battery testing, starting system and charging system analysis. LAUNCH EV Add-On Diagnostic Kit: Expands the platform for supported electric and new-energy vehicle diagnostic applications. Expandable Through LAUNCH Mall Additional diagnostic functionality can also be expanded through the LAUNCH Mall, allowing workshops to add supported software and functions according to their diagnostic requirements. Ideal For Professional automotive workshops Multi-brand repair centres Automotive diagnostic specialists Auto electricians Mobile diagnostic technicians Workshops requiring ECU coding and bi-directional testing Technicians working with compatible CAN FD and DoIP vehicles VW and Audi specialists requiring extensive guided functions Workshops looking for an expandable diagnostic platform What's in the Box Package contents may vary according to the supplied PRO3 SE kit. Optional expansion modules listed above are sold separately and are not part of the standard package unless specifically stated.