ALINX AXRF47: Xilinx Zynq UltraScale+ RFSoC XCZU47DR FPGA Development Board

Features What's Included Resources & Downloads Description AMD Zynq™ UltraScale+™ RFSoCs - The Industry’s Only Single-Chip Adaptable Radio Platform AMD Zynq™ UltraScale+™ RFSoC Gen 3: Quad-core Arm Cortex-A53 MPCore up to 1.33 GHz Dual-core Arm Cortex-R5F MPCore up to 533 MHz 16nm FinFET+ Programmable Logic Soft-decision forward error-correction cores (SD-FEC) Source: https://www.amd.com/en/products/adaptive-socs-and-fpgas/soc/zynq-ultrascale-plus-rfsoc.html AXRF47 is a High Performance SDR board with XCZU47DR FPGA, equipped with 8×14-bit 5GSPS RF-ADCs, 8×14-bit 9.85GSPS RF-DACs, 6GB DDR4, 1x QSFP28, 1x SFP28, 8T8R RF MCX ports, built for direct RF processing. Ideal for 5G, Radar, Satellite, and Wideband. Ideal for: 5G and LTE Wireless Remote-PHY for Cable Access DOCSIS 3.1 Phased Array Radar/Digital Array RADAR Test & Measurement Satellite Communications The SOM model is ACRF47. Also check out our AXRF67 with XCZU67DR. FPGA Specification SOM ACRF47 FPGA XCZU47DR-2FFVE1156I 14-bit RF-ADC w/DDC 8x, Max Rate (GSPS) 5.0 14-bit RF-DAC w/DUC 8x, Max Rate (GSPS) 9.85 Number of DDCs per RF-ADC 1 RF input Freq max. GHz 6 Decimation / Interpolation 1x, 2x, 3x, 4x, 5x, 6x, 8x, 10x, 12x, 16x, 20x, 24x, 40x Processors 4x ARM Cortex-A53, 1.333GHz 2x ARM Cortex-R5F, 533MHz High-Speed Connectivity 4 PS-GTR; PCIe Gen1/2; Serial ATA 3.1; DisplayPort™ 1.2a; USB 3.0; SGMII General Connectivity 214 PS I/O; UART; CAN; USB 2.0; I2C; SPI; 32b GPIO; Real Time Clock; Watchdog Timers; Triple Timer Counters GTY 16x Chip Level Industrial Grade Speed Grade -2 Working Temperature -40℃~85℃ System Logic Cells (K) 930 CLB LUTs (K) 425 Max. Dist. RAM (Mb) 13.0 Total Block RAM (Mb) 38.0 UltraRAM (Mb) 22.5 DSP Slices 4,272 1.8V High-Performance (HP) I/Os 104 3.3V High-Density (HD) I/O 48 Board Features DDR4 PS: 4x 1GB DDR4, total 4GB, 64bit Bus, Data Rate 2400Mbps PL: 2x 1GB DDR4, total 2GB, 32bit Bus, Data Rate 2400Mbps QSPI FLASH 2x 512Mbit, for user data storage QSFP28 1x M.2 1x NVME M.2 (PCIEx1), for M.2 SSD storage USB 3.0 1x USB3.0, (Type-C, HOST, SLAVE or OTG), for external USB devices USB UART 1x Type-C, for serial communication with PC or devices Ethernet Interface 1x 10/100/1000M Ethernet with RJ45 for data exchange Active Crystal Oscillator 1x Single-ended 33.333MHz provide PS Clock 1x LMK04828 for the PL Logic, DDR Reference, GTY Expansion Port 2x 8-pin PL I/O; 1x 10-pin PS I/O JTAG USB Type-C JTAG port for Programs Debug and Download EEPROM 1x AT24CM01 with IIC SD Card Slot 1 micro SD Card Slot, support SD Mode and SPI Mode Real Time Clock 1x Built-in RTC LEDs SOM: Carrier: 4x User Push-Buttons 1x Reset Power Supply Voltage Input: +12 V DC, PCIE 6-pin Current Input: Max. Current 8.5 A What's Included FPGA Board 1 DC Fan (installed) 1 USB to Type-C cable 1 12V Power Adapter 1 set SD Card 1x 32GB SD Card Reader 1 Dimensions Dimension 254.00 mm x 180.34 mm (Carrier Board) 115.00 mm x 85.00 mm (SOM) PCB 12 Layer (Carrier Board) 14 Layer (SOM) Independent GND and Power Layers Resources & Downloads AXRF47 User Manual (PDF) Full documentation including Schematics, Demo projects (if applicable) will be provided by CodeRobin.