Damper Upgrade Kit BoXXer Charger3.2 RC2 Crown with ButterCups

The BoXXer Charger 3.2 RC2 Crown upgrade kit with ButterCups is a complete, drop in damper upgrade for 2024 and newer BoXXer forks. It delivers the latest Charger 3.2 RC2 performance package, combining independent high speed and low speed compression adjustment, low speed rebound adjustment, updated damping tunes, and RockShox ButterCups vibration reduction. This kit is a fully assembled right side damper leg that replaces the original cartridge, with no need to rebuild or bleed the damper before installation. Designed for downhill and gravity riders wanting the latest RockShox BoXXer damper feel, Charger 3.2 is retuned to work with the LinearXL air spring system, giving the fork a quieter, more controlled ride with refined support through repeated impacts, rough terrain, and high speed sections. ButterCups at the base of the damper help isolate trail chatter before it reaches the rider, reducing high frequency vibration and helping limit hand fatigue on long runs, bike park laps, and rough downhill tracks. The result is a more settled fork feel, improved comfort, and more usable control when the trail gets steep, fast, and physical. Ideal for riders upgrading from older BoXXer Charger 2.1, Charger 3, or Charger 3.1 setups, this kit brings the latest Charger 3.2 RC2 damper platform to your existing 2024 and newer BoXXer fork. Features Complete right side Charger 3.2 RC2 damper assembly Drop in installation with no bleeding or rebuilding required Independent high speed and low speed compression adjustment Independent low speed rebound adjustment Updated Charger 3.2 damping tune designed around RockShox LinearXL fork behaviour Fitted with ButterCups to reduce trail chatter and vibration Quiet damper design focused on control and consistency Designed for downhill, gravity, and bike park use Specifications Damper type: Charger 3.2 RC2 Adjustments: High speed compression, low speed compression, low speed rebound Includes: Pre bled damper cartridge with ButterCups installed Intended use: Downhill, gravity, bike park Weight: Slight variation depending on fork model and internals Mount: Direct replacement for compatible BoXXer D1+ forks from 2024 onwards Compatibility Compatible with 2024 and newer BoXXer D1+ forks using the 38 mm stanchion platform. Not suitable for previous generation BoXXer forks. Check your fork model, year, and existing damper specification before installation to confirm compatibility with the Charger 3.2 RC2 upgrade kit. Installation Notes Professional installation recommended unless experienced with RockShox fork service procedures. Installation requires removal of the existing right side damper and replacement with the pre assembled Charger 3.2 RC2 unit. No damper bleeding is required. After installation, set baseline compression and rebound clicks, then fine tune on the trail to suit rider weight, speed, terrain, and preference. This upgrade is ideal to perform during a lower leg service.