Spartan Armor Systems AR550 Level III+ Steel Body Armor Rapid Response Kit

The Spartan Armor Systems AR550 Rapid Response Kit is a Special Threat Rated Level III+ steel body armor package that pairs two AR550 hard plates with the Hydra Gen 2 plate carrier for fast first-on-scene rifle-rated protection. Built around high-hardness AR550 steel and manufactured in the USA, the kit ships ready to wear: seat the plates in the carrier, adjust the cummerbund and shoulders, and go. Each 10" x 12" plate weighs 8 lbs 1 oz in the standard base coat. Available in Black, Coyote Brown, and OD Green, in Shooters Cut, with Single Curve or Advanced Triple Curve (ATC) plates and a choice of base coat or Encapsaloc full-coat spall mitigation. Who this is for Law enforcement and first responders: who want a grab-and-go rifle-rated setup staged in a vehicle, locker, or patrol bag. Military and security personnel: who need affordable steel armor for training, range work, or a backup loadout. Responsible civilians: building a home-defense or range kit around a budget steel plate and a sized carrier. Ballistic performance Both plates use a high-hardness AR550 steel core. Spartan Armor Systems rates the kit as Special Threat Rated Level III+ and describes it as rifle-rated against most common rifle threats. AR550 is the manufacturer's higher-hardness steel formulation, marketed above its AR500 line for special-threat rifle protection at a steel-armor price point. Spartan Armor Systems publishes the Special Threat Rated Level III+ designation for this plate but does not list specific tested rounds or velocities on the product page. Treat the plate as rifle-rated against common threats rather than as an armor-piercing rating; armor-piercing protection sits at Level IV (RF3), which steel III+ plates do not claim. Two coating options change the plate's spall behavior. The standard Base Coat Protection is the entry coating. The Encapsaloc Full Coat Spall Mitigation option adds a thicker build-up layer the manufacturer markets for spall and fragmentation containment. The full coat measures thicker and heavier than the base coat, as shown below. Weight and thickness by coating Configuration (each) Weight Thickness 10" x 12" Base Coat 8 lbs 1 oz (3.66 kg) 0.25 in (6.35 mm) 10" x 12" Full Coat 8 lbs 10 oz (3.91 kg) 0.5 in (12.7-15.2 mm) Spartan Armor Systems notes that the Single Curve and Advanced Triple Curve (ATC) plates share the same weight and thickness specifications. Plate cut and curve geometry The plates ship in Shooters Cut, which clips the upper corners so the plate clears your shoulders and lets you shoulder a rifle without the plate edge digging in. Choose Single Curve for a flatter plate that bends on one axis, or Advanced Triple Curve (ATC) for a plate contoured on multiple axes to sit closer to the torso. At 10" x 12", these plates drop into the standard 10" x 12" pocket of the included Hydra Gen 2 carrier. Specifications Threat rating: Special Threat Rated Level III+ (rifle-rated AR550 steel) Plate material: High-hardness AR550 steel Plates included: Two 10" x 12" plates Plate weight (base coat): 8 lbs 1 oz (3.66 kg) each Plate weight (full coat): 8 lbs 10 oz (3.91 kg) each Plate thickness: 0.25 in base coat; 0.5 in full coat Cut: Shooters Cut Curve options: Single Curve or Advanced Triple Curve (ATC) Coating options: Base Coat Protection or Encapsaloc Full Coat Spall Mitigation Carrier: Hydra Gen 2, 900D polyester, sizes S-4XL Country of origin: Made in the USA Warranty: 5-year warranty against manufacturer defects Fit and carrier compatibility The included Hydra Gen 2 carrier uses a dual-pocket design that accepts 10" x 12", 11" x 14", and 9.5" x 12.5" Medium ESAPI plates, so the kit's 10" x 12" plates seat in the standard pocket with room to size up later. The carrier runs S-4XL and adjusts through quick-release buckles, adjustable shoulder straps, and removable shoulder pads with hook-and-loop guides. Front and back PALS webbing carries MOLLE attachments, and the shell adds a front map pocket, cable organization loops, a padded mesh interior lining, and a rear drag handle. For measurements, check the Spartan Armor Systems plate carrier sizing guide before ordering. Frequently asked questions Is this kit NIJ Certified or NIJ Listed? No. Spartan Armor Systems rates the AR550 plates as Special Threat Rated Level III+, which is a manufacturer designation rather than an NIJ standard level. The product page does not claim NIJ certification or current Compliant Products List (CPL) listing for this kit, so it should be described as special threat rated, not as NIJ Certified or NIJ Listed. What is the difference between Level III, Level III+, and Level IV? It comes down to the threats each is built to stop. Level III is a rifle rating tested against specific lead-core rifle rounds. Level III+ is a special-threat designation above III, marketed for additional or higher-velocity rifle threats but not standardized by NIJ. Level IV (RF3) is the armor-piercing rifle rating. This kit carries the Special Threat Rated Level III+ designation. What is the difference between Single Curve and Advanced Triple Curve plates? It is about fit. A Single Curve plate bends on one axis and sits flatter against the chest. An Advanced Triple Curve (ATC) plate is contoured on multiple axes to wrap closer to the torso, which many wearers find more comfortable for extended wear. Spartan Armor Systems lists identical weight and thickness for both options, so the choice is fit, not protection level. What does the Encapsaloc full coat do? It changes the plate's coating. Base Coat Protection is the standard entry coating. The Encapsaloc Full Coat Spall Mitigation option adds a thicker build-up layer that Spartan Armor Systems markets for spall and fragmentation containment. The full coat runs heavier and thicker, at 8 lbs 10 oz and roughly 0.5 in per plate versus 8 lbs 1 oz and 0.25 in for the base coat. Can this kit be shipped to my state? It ships to most states, with exceptions. This kit cannot be shipped to New York or Connecticut due to state body armor restrictions, and it is subject to US export regulations. Under 18 U.S.C. 931, anyone with a federal felony conviction for a crime of violence is prohibited from purchasing or possessing body armor. Confirm your state's rules before ordering.