Premtool Straight Edge Polished Silver Aluminium Tile Trim

Aluminium metal trim — more durable and longer-lasting than PVC. Also available in brushed silver. For a square edge profile see the Premtool Square Edge Polished Silver. The Premtool Straight Edge Polished Silver Aluminium Tile Trim gives a sleek, high-shine finish to exposed tile edges on walls and floors. The slim 2.5mm face keeps the profile minimal and discreet. A transparent easy-peel protective film is applied to each length to prevent scratching during installation. At 2.5m per length, the polished aluminium construction is significantly more durable than PVC. 2.5m length Sizes: 8mm, 10mm, 12.5mm Wall & floor use Protective film included Polished silver finish Material Aluminium Length 2.5m per length Profile depth (D) 8 / 10 / 12.5mm Face width 2.5mm Finish Polished Silver Brand Premtool Application Walls & floors floor rated Protection Peel-off film Suitable for Wall and floor tile edge finishing Ceramic, porcelain, and natural stone tiles Internal and external installations High-traffic floor areas Not suitable for Highly acidic or alkaline cleaning products Submerged or permanently wet applications Direct contact with dissimilar metals without isolation Aluminium vs PVC tile trim — which should I use? Choose aluminium when A premium, long-lasting finish is important Floor edges are involved External use is required Choose PVC when Budget is the priority A colour-matched finish is needed Not suitable for floors or external use How to fit & cut aluminium tile trim Cutting to length 1 Measure and mark. Always measure twice.Leave the protective film on until installation is complete. 2 Cut with a fine-tooth mitre saw or metal-cutting blade.Do not use a standard wood saw blade. 3 For external corners, mitre each piece at 45°. 4 Deburr any cut edges with a fine metal file before fitting. Fitting the trim 1 Dry-fit before applying adhesive. Trim depth should be 1.5–2.0mm greater than the tile. 2 Apply adhesive and bed the fixing tab firmly in. Press along the full length. 3 Bed tiles tightly against the trim. Keep the polished face clean.Remove adhesive immediately with a damp cloth. 4 Grout the joint, then peel off the protective film.Do not peel film before grouting.