Revival - ATALANTE 7 Évo - 3-Way Loudspeaker
Revival Audio ATALANTE 7 Évo 3-Way Loudspeakers Flagship 3-Way Loudspeaker with 15-Inch BSC™ Woofer The Revival Audio ATALANTE 7 Évo is a large-format 3-way loudspeaker designed for listeners seeking greater scale, deeper bass and effortless dynamics from a premium stereo system. Building on the ATALANTE series, the 7 Évo introduces Revival Audio’s refined RASC™ Évo tweeter, upgraded RASC™ Évo midrange and a substantial 380mm (15-inch) BSC™ woofer. Together, these drivers deliver an expansive presentation with a specified frequency response extending from 23Hz to 24kHz. With 90dB sensitivity and a 6-ohm nominal impedance, the ATALANTE 7 Évo is designed to partner with a broad range of quality amplifiers while providing the scale required for larger listening spaces. Highlights & Benefits 3-way loudspeaker design — dedicated tweeter, midrange and bass drivers. 380mm (15-inch) BSC™ woofer — delivers deep, powerful and controlled bass. 28mm RASC™ Évo soft-dome tweeter — designed for smooth, extended high-frequency performance. 75mm RASC™ Évo soft-dome midrange — provides natural vocals and detailed midrange reproduction. 23Hz–24kHz frequency response — wide bandwidth for full-range music playback. 90dB sensitivity — suitable for a wide range of high-quality amplifiers. 6-ohm nominal impedance — designed for flexible amplifier matching. 300W power handling — supports substantial dynamic output. Hand-tuned crossover — developed for seamless integration between all three drivers. van den Hul Skyline internal wiring — premium internal signal cabling. AeroVex™ front bass port — designed for smoother airflow and reduced turbulence. Enhanced cabinet bracing — controls unwanted vibration and resonance. Dedicated isolation stand included — provides stable support and vibration control. Premium Walnut & Ebony veneers — refined finish created in collaboration with A+A Cooren Studio. RASC™ Évo Tweeter The ATALANTE 7 Évo uses a 28mm RASC™ Évo soft-dome tweeter engineered for clarity, precision and smooth high-frequency reproduction. Revival Audio’s enhanced ARID anti-resonance technology is designed to absorb more than 97% of internal resonance, reducing unwanted reflections inside the tweeter assembly. A neodymium magnet system, custom-coated Tetoron dome, pure aluminium voice coil and aluminium back chamber work together to provide detailed, controlled treble while maintaining a natural tonal balance. RASC™ Évo Midrange The dedicated 75mm RASC™ Évo soft-dome midrange handles the critical vocal and instrumental frequencies. Its enhanced ARID+ technology is designed to absorb more than 96% of internal resonance, while a dual-suspension system supports linear diaphragm movement. Additional technologies include a neodymium motor system, aluminium rear chamber, Tri-Zone resonance control, copper-clad aluminium voice-coil wire and a shorting ring designed to reduce distortion and improve transient response. 15-Inch BSC™ Woofer Low frequencies are reproduced by a substantial 380mm (15-inch) BSC™ woofer, providing the ATALANTE 7 Évo with the scale and authority required for full-range music reproduction. The woofer uses Revival Audio’s Basalt Sandwich Construction, combining basalt-based material with a lightweight, rigid diaphragm structure designed to balance stiffness and damping. A large 3-inch voice coil, extended 10mm linear excursion, high-roll surround, fully ventilated motor system and oversized magnet assembly help deliver powerful bass while maintaining control and responsiveness. Deep Bass Down to 23Hz With a specified 23Hz–24kHz frequency response at -6dB, the ATALANTE 7 Évo reaches deep into the lowest musical frequencies without requiring a subwoofer for many stereo applications. The large 15-inch woofer provides the physical scale needed to reproduce bass instruments, drums, orchestral recordings and dynamic electronic music with substantial weight and impact. Hand-Tuned Crossover The ATALANTE 7 Évo uses a carefully developed crossover network designed to create a seamless transition between its three drivers. Key elements include: High-quality air-core coils All-pass filter topology van den Hul Skyline internal wiring Hand-tuned driver integration The crossover frequencies are set at 340Hz and 2.25kHz, allowing each driver to operate within its optimised frequency range. AeroVex™ Front Bass Port The loudspeaker incorporates Revival Audio’s AeroVex™ aluminium-flanged bass-reflex port. Developed through extensive simulation, its wave-guided internal design is intended to minimise turbulence and reduce port noise by more than 94%. The front-firing port configuration also improves placement flexibility, allowing the ATALANTE 7 Évo to perform effectively even when positioned relatively close to a rear wall. Resonance-Controlled Cabinet The ATALANTE 7 Évo cabinet has been developed through extensive simulation and testing to maximise structural rigidity and minimise unwanted resonance. Enhanced internal bracing helps control cabinet vibration, allowing the drivers to operate from a more stable mechanical platform. Its proportions follow a balanced Golden Ratio-inspired design developed with Parisian design studio A+A Cooren, combining acoustic engineering with a distinctive premium appearance. Dedicated Isolation Stand Included A dedicated stand is included with the ATALANTE 7 Évo as part of the standard package. The stand incorporates: Decoupling spikes between speaker and stand Micro-adjustable floor spikes Premium isolation pads Rigid structural support The system is designed to reduce vibration transfer while positioning the drivers at an appropriate listening height. Premium Walnut & Ebony Finish The ATALANTE 7 Évo combines Walnut and Ebony veneers with sculpted proportions, detailed woodwork and signature Revival Audio design elements. An engraved emblem and hand-finished wooden logo complete the presentation, giving the loudspeaker a distinctive visual character suited to premium listening rooms. Why Choose the Revival Audio ATALANTE 7 Évo? The Revival Audio ATALANTE 7 Évo is designed for listeners who want the scale and authority of a large-format loudspeaker without sacrificing refinement, detail or tonal balance. Its 15-inch BSC™ woofer, RASC™ Évo tweeter and midrange, high sensitivity, wide frequency response and included isolation stands make it particularly well suited to large listening rooms and high-performance stereo systems. Specifications Technical Specifications Specification Details Type 3-Way Loudspeaker Frequency Response 23Hz–24kHz (-6dB) Sensitivity 90dB / 2.83V / 1 metre Nominal Impedance 6Ω Minimum Impedance 4.4Ω at 74Hz Crossover Frequencies 340Hz / 2.25kHz Power Handling 300W Recommended Amplifier Power Starting from 30–50W Recommended Room Size 35–80m² / 377–861ft² Drive Units Driver Specification Tweeter 1 × 28mm / 1⅛" RASC™ Évo Soft-Dome Tweeter Midrange 1 × 75mm / 3" RASC™ Évo Soft-Dome Midrange Woofer 1 × 380mm / 15" BSC™ Basalt Sandwich Construction Woofer Tweeter Technology Specification Details Driver 28mm RASC™ Évo Diaphragm Custom-Coated Tetoron Soft Dome Resonance Control Patented ARID Technology Internal Resonance Absorption 97%+ Magnet Neodymium Voice Coil Pure Aluminium Back Chamber Aluminium Back Plate Ventilated with Diffuser Midrange Technology Specification Details Driver 75mm RASC™ Évo Resonance Control Patented ARID+ Technology Internal Resonance Absorption 96%+ Magnet Neodymium Suspension Double Suspension Dome Back Chamber Aluminium Resonance Control Tri-Zone Voice Coil Wire Copper-Clad Aluminium Motor Control Shorting Ring Back Plate Ventilated with Diffuser Woofer Technology Specification Details Driver Diameter 380mm / 15 inches Cone Technology BSC™ Basalt Sandwich Construction Linear Excursion Extended 10mm Voice Coil 3 inches Motor System Fully Ventilated Magnet System Oversized Surround High-Roll Bass Loading AeroVex™ Front-Ported Bass Reflex Crossover Specification Details Design Hand-Tuned Coils High-Quality Air Coils Filter Topology All-Pass Internal Wiring van den Hul Skyline Crossover Frequencies 340Hz / 2.25kHz Cabinet & Stand Specification Details Cabinet Resonance-Controlled Construction Internal Bracing Enhanced Bass Port AeroVex™ Aluminium-Flanged Front Port Port Noise Reduction 94%+ Stand Dedicated Isolation Stand Included Speaker-to-Stand Isolation Decoupling Spikes Floor Isolation Micro-Adjustable Spikes & Isolation Pads Veneers Walnut & Ebony Dimensions & Weight Specification Details Dimensions With Stand – H × W × D 1160 × 456 × 480mm Dimensions Without Stand – H × W × D 820 × 456 × 480mm Weight With Stand 67kg each Weight Without Stand 54.6kg each Included Stand Specification Details Dedicated Stand Included Yes Included in Standard Package Yes Isolation Decoupling & Micro-Adjustable Spikes Total Height With Stand 1160mm