KEF KASA 8-150M Network DSP Amplifier

KEF KASA 8-150M Network DSP Amplifier A 8-channel network DSP power amplifier for KEF custom-install and outdoor systems, combining flexible channel allocation with quiet passive cooling. KASA 8-150M is built for installed systems where amplification and DSP need to be treated as part of the speaker design. Its 8 channels make it suitable for distributed outdoor zones, architectural systems and projects where rack space and predictable thermal behaviour matter. The amplifier uses a Class D output stage with advanced GaN FET devices and silent passive cooling. That is useful in residential racks because there is no fan noise to manage, although the rack still needs sensible ventilation and service access. Power That Can Be Allocated Around the Project Single-channel and bridged ratings let the installer match channels to different speaker roles. Single-channel output is rated at 150W into 4 ohms and 75W into 8 ohms at 1% THD. Bridged output is rated at 300W into 4 ohms and 300W into 8 ohms. With all channels driven, the published figure is 135W per channel @ 4 ohms. Keeping these test conditions separate matters because a distributed system can load several channels at once, while a bridged subwoofer channel has a different requirement again. Rack and Control Planning Network DSP amplification belongs in the system design before cable is installed. The chassis is 88 x 427 x 398mm and the rack-bracket depth/width figure is 88 x 481.9 x 430.5mm. Power input is universal 100-240VAC 50/60Hz, standby draw is below 2W and cooling is passive. For outdoor work, confirm the loudspeaker count, impedance, cable length and any bridged subwoofer channels before assigning amplifier channels. That avoids changing the rack or cable topology after the landscape work is finished. Key Features 8-channel Network DSP amplifier 150W single-channel output into 4 ohms 75W single-channel output into 8 ohms Bridged output up to 300W into 4 ohms Class D with advanced GaN FET output stage Silent passive cooling Universal 100-240VAC 50/60Hz power input Specifications Specification Details Product type Network DSP power amplifier Model KASA 8-150M Channels 8 Output into 4 ohms 150W Output into 8 ohms 75W Bridged output 300W into 4 ohms; 300W into 8 ohms Cooling Silent passive cooling Dimensions 88 x 427 x 398mm Detailed Technical Specifications For those who like to drag out all the useful bits View full technical specificationsAmplification Channels: 8 Single-channel output, 4 ohms: 150W Single-channel output, 8 ohms: 75W Bridged output, 4 ohms: 300W Bridged output, 8 ohms: 300W Maximum output, all channels driven: 135W per channel @ 4 ohms Frequency response: 20Hz-20kHz THD+Noise: <0.008% @ 1kHz, 4 ohm, 10W Signal-to-noise ratio: >95dB Amplifier class: Class D with advanced GaN FET output stage Installation Cooling: Silent passive cooling Standby power: <2W Power input: 100-240VAC 50/60Hz Product dimensions: 88 x 427 x 398mm Dimensions with rack bracket and knobs: 88 x 481.9 x 430.5mm Net weight: 8.8kg Gross weight: 14.2kg SKU: SP4143B0XA Important Notes Amplifier power figures use different load and channel-count test conditions. Do not compare the bridged or single-channel headline figure directly with the all-channels-driven rating. Confirm speaker impedance, cable run, DSP configuration and bridged-channel requirements before final rack wiring. Passive cooling removes fan noise but does not remove the need for appropriate rack ventilation. The Audio Experts Take KASA 8-150M is a system-design product. The right model is determined by how many loudspeaker channels the project needs, which loads are being driven and whether any channels need to be bridged for higher-power duties. For an outdoor KEF installation, we would map speakers, subwoofers and zones first, then choose the KASA channel count and power tier. That keeps the amplifier purchase tied to the real cable and speaker layout rather than a headline wattage number. Brand new. Full Australian warranty. Contact The Audio Experts for current availability, system design and installation advice.