Sheet Metal Roller 2-Station Bender for 0.1–1mm Metal Sheets, 0–100° Adjustable

Sheet Metal Roller 2-Station Bender — Precision Bending for Roofing & Metal Fabrication Struggling to get clean, consistent bends on thin metal sheets without wrinkling or warping? Whether you're forming snap-lock roof eave panels, flashing, or custom metal profiles, imprecise tools waste material and time. This 2-station sheet metal roller bender is engineered for roofers, HVAC technicians, and DIY fabricators who demand repeatable accuracy on every pass. Built from anodized aluminum alloy with stainless steel bending rollers, this bender handles aluminum, iron, stainless steel, and alloy plates from 0.1 to 1mm thick. The adjustable clamping height spans 0.26–7 inches, accommodating bending lengths from 7 to 180mm (approximately ¼ in to 7 in). The tool weighs 6.79 lbs (3.08 kg) and measures 7.68 × 4.17 × 11.42 inches — compact enough for on-site use. Ideal for snap-lock roof panel forming, metal eave trim bending, HVAC duct edge work, and custom sheet metal profiling. The 0–100° adjustable oblique bearing system lets you dial in precise angles for metal roofing fabrication, making it a go-to sheet metal bending tool for both professionals and serious DIYers. ✅ Compatible with aluminum, iron, stainless steel & alloy sheets 0.1–1mm thick; bending lengths 7–180mm (¼–7 in) ✅ Key Features of This Sheet Metal Roller Bender 🔨 0–100° Adjustable Oblique Bearing System: Angled precision roller structure enables scratch-free 90° sharp bends and full-angle adjustability, ideal for snap-lock roof eave panel forming and thin sheet roofing fabrication. 🔧 Wide Material Compatibility: Works with aluminum, iron, stainless steel, and alloy plates 0.1–1mm thick; 0.26–7 in adjustable clamping height fits bending lengths from 7 to 180mm for diverse on-site tasks. 📏 Precision Scale Shafts with Quick-Lock Knobs: Stainless steel graduated guide shafts paired with fast-tightening lock knobs deliver accurate, repeatable height positioning — uniform bends every single operation. 🛡️ Labor-Saving Multi-Bearing Roller Mechanism: High-density alloy bearings with a 0.7mm precision gap provide ultra-smooth back-and-forth sliding; multi-pass gentle bending prevents sheet wrinkling for flawless finished edges. 🏗️ Heavy-Duty All-Metal Construction: Anodized aluminum alloy frame with stainless steel rollers and an integrated portable handle; solid full-metal build withstands frequent, repeated use for long service life. 🔑 2-Year Manufacturer Warranty: Backed by a 2-year warranty for peace of mind on every job — professional-grade reliability you can count on. 📦 What's in the Box Sheet Metal Roller 2-Station Bender × 1 Hex Key × 1 🎯 Who Is This For? 🏠 Roofing Contractors Form snap-lock roof eave panels and metal flashing with precise, repeatable bends — no more manual hammering or inconsistent angles on the job site. 🔧 HVAC Technicians Bend duct edges, trim pieces, and thin metal components cleanly without wrinkling — the 0.7mm bearing gap keeps every pass smooth and controlled. 🛠️ DIY Metal Fabricators Tackle custom sheet metal profiles, brackets, and enclosures at home. The quick-lock knobs and scale shafts make setup fast even without professional training. 🏭 Light Industrial & Workshop Use Ideal for small-batch metal forming in workshops — the all-metal frame handles repeated daily use without fatigue or wear. 📐 Technical Specifications Compatible Sheet Thickness 0.1–1mm Bending Angle Range 0–100° Clamping Height Range 0.26–7 in (approx. 6.6–178mm) Bending Length Range 7–180mm (approx. ¼–7 in) Compatible Materials Aluminum, Iron, Stainless Steel, Alloy Plate Frame Material Anodized Aluminum Alloy Roller Material Stainless Steel Bearing Gap 0.7mm precision Color Red Product Dimensions 7.68 × 4.17 × 11.42 in (195 × 106 × 290mm) Weight 6.79 lbs (3.08 kg) Power Source Hand-powered (manual) Warranty 2-Year Manufacturer Warranty ❓ Frequently Asked Questions What metal sheet thicknesses does this bender work with? This bender is designed for metal sheets between 0.1mm and 1mm thick, including aluminum, iron, stainless steel, and alloy plates. Sheets thicker than 1mm may exceed the tool's capacity and are not recommended. What bending angles can I achieve? The oblique bearing system adjusts from 0° to 100°, giving you full flexibility for standard 90° bends as well as acute and obtuse angles commonly needed in roofing and metal fabrication work. Will this tool leave scratches or marks on my metal sheets? The precision roller mechanism is designed to be scratch-free. The 0.7mm bearing gap and smooth stainless steel rollers apply even pressure across the sheet, minimizing surface damage during bending. How do I set the bending height accurately? Use the stainless steel graduated scale shafts to set your desired clamping height (0.26–7 in range), then tighten the quick-lock knobs to secure the position. The scale markings allow you to replicate the same setting across multiple bends consistently. Is this tool suitable for beginners? Yes. The adjust-lock-slide-bend workflow is straightforward, and the scale shafts take the guesswork out of positioning. Most users get comfortable with the tool after a few practice bends on scrap material. Will the bearings wear out quickly with regular use? The high-density alloy bearings are built for durability under frequent use. The all-metal anodized aluminum frame and stainless steel rollers are designed to withstand repeated daily operation. The tool also comes with a 2-year manufacturer warranty for added confidence. Can I use this for snap-lock roof panel forming? Yes. The 0–100° adjustable oblique bearing system is specifically suited for snap-lock roof eave panel forming and thin sheet roofing fabrication, making it a practical choice for roofing contractors and installers. What is included in the box? The package includes 1× Sheet Metal Roller 2-Station Bender and 1× Hex Key for assembly and adjustment. 🛒 Select your quantity above, then add to cart.