AC Infinity Thermoforge Ducted Ceramic Heater

Controlled warm air enters the growing area through ducting with the AC Infinity Thermoforge Ducted Ceramic Heater, keeping an exposed heater outside the plant space through cold nights and unheated rooms. Both models combine a PTC ceramic element, variable fan and climate probe, allowing heat to respond to temperature or vapour pressure deficit rather than simply switching at full output. The smaller and larger models differ in heating capacity, duct arrangement and control features, with exact output, coverage and dimensions kept in Technical Specifications. Positive temperature coefficient ceramic increases in electrical resistance as it heats, naturally reducing current as the element approaches its operating temperature. A blower moves air across the finned element and into the duct, so warmth is carried into the grow space by airflow. AC Infinity control both fan and heat over ten levels using pulse width modulation. This lets the unit settle at a partial output near its target instead of repeatedly cycling between full heat and off. Fan-only operation is also available when air movement is needed without added heat. Sensor connection, ducting and onboard control differ across the AC Infinity Thermoforge family, so inclusions and model features belong in Technical Specifications. Both can operate from their own climate sensor and controls or join UIS for coordinated scheduling. The higher-output ducted model carries three purchase-critical requirements: its single sensor port accepts either the supplied probe or a UIS controller lead, never both at once; its exhaust must use AC Infinity's heat-resistant hose; and any optional intake must use flexible layered 100 mm ducting. AC Infinity also limit incoming air for this model to 65% RH and state that it must not draw from a space containing a humidifier. They govern placement beside humid grow spaces. NOTE: Keep the heater upright on a firm, level surface in a dry indoor location, with at least 0.9 m clearance from walls, outlets, furniture, bedding, paper, clothing, curtains and other combustible material. Never obstruct the intake or exhaust, allow the body to touch the tent, or use the unit near liquids. Plug it directly into a wall outlet, not an extension lead or power board, and switch off, unplug and allow it to cool before cleaning.