Mytee 80-120 Prep Center S™ All-in-One Detail Machine | 12 Gallon, Extraction + Dry Vac + Blower

Four machines in one cart The Mytee 80-120 Prep Center S is not a bigger extractor. It is the whole interior cart. Hot water extraction with 12-gallon tanks and 1,200 watts of REAL HEAT™ reaching 210 degrees. A dry vacuum with its own 25-foot hose, claw, and crevice tool. A blower for drying interiors, door jambs, and mirrors. Three onboard chemical dispenser bottles with adjustable nozzles. An air connection for running a brush during paint correction work. One machine, one cord, one place to stand. What this actually replaces Walk through a typical recon or full-detail interior and count the equipment. You dry vacuum the carpets and crevices. You extract the seats and floors with hot water. You blow out the door jambs, vents, and trim seams. You apply dressings and cleaners from spray bottles you carry separately. That is normally three or four pieces of gear, three or four trips, and three or four things to store, maintain, and trip over. The Prep Center S does all of it from one cart that you roll to the vehicle once. For a fixed detail bay or a dealership recon line, that consolidation is the entire value. It is not about cleaning better than a dedicated extractor. It is about eliminating the walking. Where it sits against the HP120 Being straight about this matters, because these two machines are closer than the price gap suggests. Specification Mytee HP120 Mytee 80-120 Prep Center S Solution tank 10 gallons 12 gallons Recovery tank 10 gallons 12 gallons Heater 1,200 watts REAL HEAT™ 1,200 watts REAL HEAT™ Max temperature 210°F 210°F Water lift 130 inches 130 inches Airflow 100 CFM 100 CFM Pump 120 PSI, 1.3 GPM 120 PSI, 1.3 GPM Extraction hose 15 ft 25 ft Dry vacuum No Yes, with 25 ft hose Blower / drying No Yes Chemical dispensing No Yes, three bottles Air brush connection No Yes Net weight 109 lbs 144 lbs The extraction engine is identical. Same vacuum motor, same pump, same heater, same maximum temperature. What you are paying for is the dry vacuum, the blower, the chemical dispensing, the air connection, and 10 extra feet of hose. You are buying consolidation, not extraction power. If you already own a good shop vacuum and a blower and you are happy walking between them, the HP120 Grand Prix does the extraction identically for less money. If you want the interior handled from one cart, this is the machine. The 25-foot hoses change the workflow Both the extraction hose and the dry vacuum hose run 25 feet, against 15 feet on the rest of the line. That difference is larger in practice than it sounds. Twenty-five feet reaches an entire full-size SUV, both rows and the cargo area, from one parked position. It also reaches a second vehicle in an adjacent bay without moving the cart. On a recon line where cars are staged nose to tail, that is real minutes back on every unit. Power requirements, stated plainly The Prep Center S draws 20 amps at 110 to 120 volts on a single 25-foot 12/3 cord. That is a full 20-amp circuit. A standard 15-amp household outlet will not carry it, and sharing the circuit will trip the breaker. Plan for a dedicated 20-amp outlet in the bay. Given the size and weight of this machine, it is going to live in a fixed location anyway, so wire for it properly once. Running everything from a single cord is the notable part. Machines that combine this many functions often need two circuits. Built to stay in service The housing is roto-molded polyethylene. It does not rust, it does not dent, and it survives years in a working bay. Ten-inch foam-filled rear wheels carry 144 pounds across expansion joints, thresholds, and cracked lot surfaces that stop small hard casters. Four-inch locking front casters hold position while you work. Included in the box: the 8400P Air Lite™ upholstery tool, a 25-foot vacuum and solution hose combo, a 25-foot dry vacuum hose, a dry vacuum claw, a crevice tool, a blower attachment, a faucet fill hose, and three chemical dispenser bottles with adjustable nozzles. Who this machine is right for Dealership recon departments. High volume, fixed location, and a direct payoff from cutting steps per vehicle. Multi-bay detail shops. One cart handles a full interior, which frees floor space and reduces the equipment you maintain. Fleet maintenance operations. Consistent interior process across a large number of vehicles. Established detail businesses consolidating equipment. If you are replacing a shop vac, a blower, and an extractor at the same time, buying one machine is usually the better decision. It is not the right machine for mobile work. At 144 pounds and 55 inches tall, it is not going in and out of a van. For mobile operations look at the HP90 Stingray or the Mytee 8070. Factory support, direct from Mytee Mytee builds this machine in San Diego and backs it with factory technical support. For questions about operation, parts, or service on your Prep Center S, Mytee's support team is the fastest and most authoritative resource, and they are the people to call first. Mytee publishes the full documentation library for the 80-120, including the operator manual, quick-start guide, parts lists, and wiring schematics. Buy from an authorized dealer At this price the warranty is not a detail, it is a significant part of what you are buying. Mytee's warranty policy says that products sold by unauthorized sellers are not covered by manufacturer warranty or support. On a machine with a heater, a pump, a vacuum motor, and a blower, losing factory coverage to save a few hundred dollars is a bad trade. Rightlook is an authorized Mytee dealer. Buy here and the warranty is intact from day one. Why buy the Mytee 80-120 from Rightlook Rightlook has been in the auto enhancement industry since 1998. We train operators, we build detail shops, and we have specified equipment for thousands of auto enhancement startups. That background matters most on a purchase this size. We have set up recon lines, multi-bay shops, and mobile rigs, and we know when a consolidated machine earns its price and when it does not. If you are weighing the Prep Center S against the HP120 Grand Prix, reach out before you order and we will walk you through it honestly. Specifications Specification Mytee 80-120 Prep Center S Model number 80-120 Manufacturer Mytee LLC, San Diego, CA Solution tank 12 gallons (45.4 L) Recovery tank 12 gallons (45.4 L) Heater 1,200 watt REAL HEAT™ Maximum temperature 210°F Vacuum motor Single 3-stage Water lift 130 inches Airflow 100 CFM Pump Diaphragm demand Pump pressure 120 PSI Flow rate 1.3 GPM Power cord Single 25 ft, 12/3 gauge Amp draw 20 amps at 110–120V, 60 Hz Extraction hose 25 ft vacuum and solution combo Dry vacuum hose 25 ft Included tool 8400P Air Lite™ upholstery tool Dimensions 31 x 19 x 55 in Net weight 144 lbs Shipping weight 190 lbs Shipping dimensions 42 x 24 x 74 in Housing Roto-molded polyethylene Rear wheels 10 in foam-filled Front casters 4 in locking Functions Function Included Hot water extraction Yes, 12 gallons at 210°F Dry vacuuming Yes, with 25 ft hose, claw, and crevice tool Blowing and drying Yes, blower attachment tool Chemical application Yes, three dispenser bottles with adjustable nozzles Air brush connection Yes, for paint correction work In the box 80-120 Prep Center S machine, 8400P Air Lite™ upholstery tool, 25 ft vacuum and solution hose combo, 25 ft dry vacuum hose, dry vacuum claw, dry vacuum crevice tool, blower attachment tool, faucet fill hose, three chemical dispenser bottles with adjustable nozzles, operator manual. Warranty at a glance The 80-120 carries Mytee's limited warranty. One year on parts and domestic labor across all components. Two years on the major components, meaning the pump, the vacuum motor, and the heater. Ten years on the rotationally molded housing and tanks. Coverage runs to the original purchaser and requires that the machine was purchased from Mytee or an authorized Mytee dealer. Read the full Mytee Limited Warranty Policy before you buy anywhere. Coverage Term Parts and domestic labor, all components 1 year from date of original purchase Major components: pump, vacuum motor, heater 2 years from date of original purchase Rotationally molded housing and tanks 10 years from date of original purchase Spare parts purchased direct from Mytee 90 days from date of purchase What the warranty does not cover Warranty is valid for the original purchaser only and begins on the date of customer purchase. Coverage requires purchase from Mytee or an authorized Mytee dealer or service center. Products sold by unauthorized sellers are not covered by manufacturer warranty or support. Coverage is void with misapplication, abuse, lack of maintenance, negligence, abnormal use, alteration of design, use of incompatible or corrosive chemicals, use in a rental service, or service and repairs performed by anyone other than Mytee or an authorized dealer. Normal wear parts are not covered. Major component and housing coverage does not include shipping or labor. These products are intended for commercial, industrial, or institutional use by adults trained in their operation. Read the full Mytee Limited Warranty Policy for complete terms. Frequently Asked Questions What does the Mytee 80-120 Prep Center S do? The Mytee 80-120 Prep Center S combines five functions in one machine: hot water carpet and upholstery extraction, dry vacuuming, blowing and drying, chemical dispensing from three onboard bottles, and an air connection for running a brush during paint correction. How many gallons is the Mytee 80-120? The Mytee 80-120 Prep Center S has a 12-gallon solution tank and a 12-gallon recovery tank, the largest capacity Mytee offers in a corded automotive detail machine. How hot does the Mytee 80-120 get? The Mytee 80-120 reaches a maximum temperature of 210 degrees Fahrenheit using its 1,200-watt REAL HEAT™ system. What is the difference between the Mytee 80-120 and the HP120 Grand Prix? The extraction systems are identical. Both use the same 3-stage vacuum motor producing 130 inches of water lift at 100 CFM, the same 120 PSI pump, and the same 1,200-watt heater reaching 210 degrees. The 80-120 adds a dry vacuum, a blower, chemical dispensing, an air brush connection, 12-gallon tanks instead of 10, and 25-foot hoses instead of 15-foot. The HP120 is extraction only. Does the Mytee 80-120 include a dry vacuum? Yes. The 80-120 includes a dry vacuum function with a dedicated 25-foot hose, a dry vacuum claw, and a crevice tool, so you do not need a separate shop vacuum. Can the Mytee 80-120 blow dry an interior? Yes. The 80-120 includes a blower attachment tool for drying interiors, door jambs, vents, and trim seams. What circuit does the Mytee 80-120 need? The Mytee 80-120 draws 20 amps at 110 to 120 volts and requires a dedicated 20-amp circuit. A standard 15-amp household outlet will not support it. It runs every function from a single 25-foot cord. How much does the Mytee 80-120 weigh? The Mytee 80-120 weighs 144 pounds empty. Shipping weight is 190 pounds and it ships by freight rather than parcel. Is the Mytee 80-120 good for mobile detailing? No. At 144 pounds and 55 inches tall, the 80-120 is built for a fixed detail bay or recon line. For mobile work the Mytee HP90 Stingray or the Mytee 8070 are the appropriate machines. What is the warranty on the Mytee 80-120? The Mytee 80-120 carries a one-year limited warranty on parts and domestic labor for all components, a two-year warranty on major components including the pump, vacuum motor, and heater, and a ten-year warranty on the rotationally molded housing and tanks. Coverage begins on the date of purchase and applies to the original purchaser only. Does the Mytee warranty apply if I buy from a third-party seller? No. Mytee's limited warranty policy states that products sold by unauthorized sellers are not covered by manufacturer warranty or support. Coverage requires purchase from Mytee or an authorized Mytee dealer or service center. Rightlook is an authorized Mytee dealer. Who provides technical support for the Mytee 80-120? Mytee provides factory technical support for the 80-120 direct from their San Diego facility, along with the full documentation library including the operator manual, parts lists, and wiring schematics.