Magnetic Hex Plug Caps for Swoop Peg Flight Stands

Magnetic hex plug caps replace the fixed joint between your miniature and its swoop peg flight stand with a magnetic one, so the model lifts off for storage and transport. One cap half glues to the stand, the other to the model, and the two hold together on a pair of N52 NiCuNi 3mm x 2mm neodymium magnets. The magnets ship loose, so you set the polarity as you glue them in. Cap Installation Scuff the gluing surface of all magnets. Insert and glue a 3mm x 2mm disk magnet deep into the hole in the hex cap bottom. As shown in the illustration, it is easier if you use a second magnet along with a Magnicator to get that magnet all of the way down. Insert and glue a 3mm x 2mm disk magnet into the top part of the hex cap, ensure that the polarity is compatible with the bottom hex cap, as shown in the illustration. Glue the hex cap bottom to the clear plastic swoop flight stand that came with your model kit. Glue the hex cap top to your plastic model at the spot where the swoop stand was originally supposed to go. You can now remove the model from the flight stand for more convenient storage or transport. What's Included Each set comprises 1 male hex cap top, 1 female hex cap bottom, and 2 loose N52 NiCuNi 3mm x 2mm neodymium magnets, one for each cap half. 3-Pack 5-Pack Male hex plug caps 3 5 Female hex plug caps 3 5 N52 NiCuNi 3mm x 2mm magnets 6 10 Compatibility Primaris Inceptors Primaris Suppressors Adeptus Mechanicus Pteraxii Kharadron Overlord Skywarden & Endrinriggers