S6X54A#ABA HPE Networking CW 2150 48p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 770W Switch

BRAND NEW WITH FULL HPE WARRANTY!!! Overview S6X54A#ABA is the HPE Networking CW 2150 48p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 770W Switch, a fully managed Layer 3 Ethernet switch designed for small and midsize businesses, branch offices, and enterprise network deployments. It combines 48 Gigabit PoE+ access ports with four 1G/10G SFP+ uplinks, providing high-density connectivity for IP phones, wireless access points, cameras, IoT devices, and other powered endpoints. HPE specifies 176 Gbps switching capacity and 130 Mpps forwarding performance for this model. The S6X54A#ABA provides a substantial 770W PoE+ budget, allowing organizations to deploy multiple powered network devices without installing separate power supplies at each endpoint. Layer 3 capabilities, QoS, IPv4/IPv6 support, and Intelligent Resilient Fabric (IRF) stacking make it suitable for networks that require centralized management, scalability, and operational resilience. The 1U rack-mountable design fits conventional data-center and network-closet environments. Key Features Processor: Dual-core ARM processor at 1.2 GHz Memory: 1 GB SDRAM Storage: 512 MB flash Controller: Integrated Layer 3 managed switching architecture Networking / Ports: 48 × 10/100/1000BASE-T PoE+ ports 4 × 1G/10GBASE-X SFP+ ports RJ-45 console USB Type-C console USB port Out-of-band management (OOBM) Switching Capacity: 176 Gbps Forwarding Rate: 130 Mpps PoE Budget: 770W Power & Cooling: Fixed AC power supply; two fans Management: Web GUI, CLI, SmartMC, HPE IMC, AirWave, REST API, SNMP Stacking: Up to 9-member IRF stack Security: Layer 2/Layer 3 access-control and authentication capabilities Form Factor: 1U rack-mountable switch Technical Specifications Processor Type: Dual-core ARM, 1.2 GHz Chipset / Platform: HPE Networking CW 2150 platform Memory Technology: 1 GB SDRAM Flash Memory: 512 MB Storage Interface: 512 MB internal flash RAID Support: Not applicable Expansion Slots: 4 × 1G/10G SFP+ uplink/stacking ports Networking: 48 × 10/100/1000BASE-T PoE+ 4 × 1/10G SFP+ Layer 3 switching IPv4/IPv6 dual stack QoS RIP and OSPF IRF stacking I/O Ports: 1 × RJ-45 console 1 × USB Type-C console 1 × USB 1 × OOBM Switching Capacity: 176 Gbps Throughput: 130 Mpps Latency: <5 µs at 1GbE; <3 µs at 10GbE MAC Address Table: 16K IPv4 Routes: 1,500 IPv6 Routes: 512 Packet Buffer: 1.5 MB Operating Temperature: -5°C to 50°C (23°F to 122°F) Physical Specifications Form Factor: 1U rack-mountable Weight: 4.2 kg 9.26 lbs Dimensions: 440 × 260 × 44 mm 17.32 × 10.24 × 1.73 inches Rack Compatibility: Standard 19-inch rack; 1U height The HPE CW 2150 QuickSpecs identify the 48-port 770W model as 4.2 kg with dimensions of 440 × 260 × 44 mm. Ideal For Enterprise and SMB access-layer networks Branch-office network deployments IP phone and unified communications infrastructure Wireless access-point deployments IP surveillance and security-camera networks IoT and PoE-enabled device environments Network closets and data centers Organizations requiring 10GbE SFP+ uplinks Networks requiring multi-switch IRF stacking High-density PoE+ deployments with substantial power requirements Warranty & Support Standard Manufacturer Warranty: HPE Limited Lifetime Hardware Warranty. Support Compatibility: HPE support and service options are available for organizations requiring enhanced technical assistance and extended service coverage. Management Support: HPE IMC, AirWave, SmartMC, SNMP, REST API, Web GUI, and CLI provide multiple management and monitoring options. FAQs 1. How many devices can the S6X54A#ABA connect? The switch provides 48 × 10/100/1000BASE-T PoE+ access ports, allowing it to connect up to 48 Ethernet endpoints directly, plus four SFP+ ports for 1G/10G uplinks or stacking. 2. What is the PoE power budget of the HPE S6X54A#ABA? The switch provides a 770W PoE+ budget, making it suitable for high-density deployments involving wireless access points, IP phones, cameras, and other PoE-powered devices. 3. Does the S6X54A#ABA support 10GbE? Yes. It has four 1G/10G SFP+ ports that support 1GbE or 10GbE connectivity for uplinks and stacking. 4. Can multiple HPE CW 2150 switches be stacked? Yes. The CW 2150 supports IRF stacking with up to nine members, allowing multiple switches to operate as a coordinated network infrastructure. 5. How is the switch managed? The S6X54A#ABA supports Web GUI and CLI management along with SmartMC, HPE Intelligent Management Center (IMC), AirWave, REST API, and SNMP. 6. Is the S6X54A#ABA suitable for a standard network rack? Yes. The switch has a 1U rack-mountable form factor and measures 440 × 260 × 44 mm, making it suitable for standard 19-inch rack installations.