Nevada III Electric Unit Heater

The Nevada III is a wall mounted electric fan heater for warehouses, workshops, halls and trade counters. Six outputs from 4.5kW to 20kW, with adjustable discharge segments to aim warm air where it is needed. Runs on a 400V supply and ships complete with the ECON control and matching bracket. Technical data Model Air volume Outlet air temp Fan input Fan current Noise at 5m Weight 1E 4.5kW 2,225 m³/h 16°C 165W 0.9A 54 dB(A) 19kg 1E 6kW 2,225 m³/h 18°C 165W 0.9A 54 dB(A) 19kg 1E 7.5kW 2,225 m³/h 20°C 165W 0.9A 54 dB(A) 19kg 2E 10kW 3,650 m³/h 18°C 260W 1.4A 58 dB(A) 26kg 2E 15kW 3,650 m³/h 22°C 260W 1.4A 58 dB(A) 26kg 2E 20kW 3,650 m³/h 26°C 260W 1.4A 58 dB(A) 28kg Outlet air temperature is quoted with intake air at 10°C. Dimensions and coverage Nevada III 1E (4.5 to 7.5kW) Nevada III 2E (10 to 20kW) Width 570mm 720mm Height 470mm 600mm Depth 600mm 630mm Maximum tilt in bracket 16 degrees 12 degrees Mounting height up to 3.9m up to 4.2m Air throw up to 7.2m up to 7.7m Mounting height and throw are quoted at a 10°C difference between outlet and room temperature. Both figures increase at smaller temperature differences. Electrical Output Supply cable Circuit protection 4.5kW, 6kW, 7.5kW 5C x 2.5mm² 3 x 10A type B 10kW, 15kW 5C x 4mm² 3 x 16A type B 20kW 5C x 4mm² and 5C x 6mm² 3 x 16A and 3 x 25A type B The electric heater runs on 400V 50Hz three phase. The fan itself runs on 230V. Each unit has two heater sections wired on separate circuits, which is why two cable and breaker ratings are given for the 20kW model. Installation and connection must be carried out by a qualified electrician. Controls The TP1 basic room thermostat is available separately where on and off temperature control is required.