30A 12V Prewired Toggle Switch Kit - ON/OFF Plate and Cap

What's in the Box 1 x Prewired metal toggle switch 1 x Black ON/OFF mounting plate 1 x Protective toggle cap and pictured sealing pieces 4 x Mounting screws Product Features Positive ON/OFF Control - The latching SPST toggle remains in its selected ON or OFF position. The marked faceplate makes the switch state legible on a vehicle, boat, or equipment panel. Prewired Lead Pair - Two 14 AWG leads are attached to the switch body. The approximately 20 cm / 7.8 in leads remove one small terminal-preparation step at the rear of a panel. Sealed Toggle Details - A red ring is visible around the metal toggle neck and the switch body has sealed-looking lead exits. The separate black cap can cover the lever when the installation calls for another barrier against incidental spray. Complete Mounting Face - The black ON/OFF plate has four corner screw holes and a central switch opening. The included screws let the visible control be installed as a tidy panel assembly rather than a bare toggle through an unlabeled hole. Defined Electrical Ratings - The switch lists 30A at 12V DC as well as two AC ratings. The values give buyers an initial screening point for a load, provided circuit protection and installation conditions are checked. Technical Specifications Model KN3F-101W-14AWG20CM#WPC-06#DS-KIT Product Type Latching SPST ON/OFF toggle switch kit Stated DC Rating 30A at 12V DC Stated AC Ratings 20A at 125V AC; 15A at 250V AC Wire Leads 2 preattached 14 AWG leads Lead Length 20 cm / 7.8 in Plate Black aluminum ON/OFF plate Plate Size Approx. 2.5 × 1.76 in Accessories Protective cap and 4 mounting screws shown