First Service: BIG TWINS

INITIAL SERVICE INSPECTION REPORT Bike Runs Y/N Bike Clean and and Fit for work Y/N – Call re Cleaning Fee Bike Condition : Poor/Average/Good/Excellent Levers and controls operational ( advise if any bent or broken or malfunctions) Y/N Grips functional ( No if torn or spinning) Y/N Bar ends in place ( No if handlebars exposed) Y/N Front Tyre Condition _____% Remaining Rear Tyre Condition _____% Remaining Forks Leaking : Y/N Battery Load test (CCA): Charge rate (Volts): ENGINE & FLUIDS Change engine oil Replace engine oil filter Check primary fluid level/condition Check transmission fluid level/condition Check coolant level/condition — if applicable AIR, FUEL & IGNITION Inspect air filter/air cleaner Inspect plug leads Check throttle operation and free play Check idle/running condition Check for abnormal engine noises DRIVE Inspect final drive belt for wear/damage Check belt tension Check belt alignment Inspect front and rear pulleys Inspect primary drive for leaks/noise BRAKE Inspect front brake disc Inspect rear brake disc Check front brake fluid level/condition Check rear brake fluid level/condition Inspect brake hoses and fittings Check front brake operation Check rear brake operation Check ABS warning light/system operation — if fitted TYRE & WHEELS Front tyre pressure: ______ PSI Rear tyre pressure: ______ PSI Inspect tyres for cracking/damage/uneven wear Inspect wheels/rims for damage Check spokes/tension — if applicable STEERING & SUSPENSION Check handlebars/risers Check steering head bearings Inspect front forks for leaks/damage Check rear shocks for leaks/damage Check suspension fasteners Check swingarm for excessive play CONTROLS Check clutch operation/free play Check throttle operation/return Check front brake lever Check gear selector Check footrests/floorboards Check side stand and safety switch Lubricate controls/pivots as required ELECTRICAL Battery terminals secure/clean Headlight — high/low beam Front indicators Rear indicators Brake light — front lever / rear pedal Horn Check for stored fault codes GENERAL SAFETY INSPECTION Check mirrors Check exhaust system/mounts Check exhaust for leaks Check exhaust for leaks Check visible fasteners for security Inspect frame for damage Check seat/mounting Check number plate/mounting Check accessories for security Check for visible oil/fluid leaks FINAL Reset service reminder — if applicable Road test Check braking performance Check clutch/gearbox operation Check steering/handling Check for abnormal vibration/noise Final leak inspection Final tyre pressure check Motorcycle cleaned/wiped down Technician final inspection POST SERVICE REPORT POST SERVICE REPORT – ITEMS REQUIRE ATTENTION POST SERVICE REPORT – RECOMMENED/UPCOMING MAINTENCE Notes: