Magewell Pro Convert for NDI to AIO

The Magewell Pro Convert for NDI to AIO is a compact NDI decoder that converts a live NDI or IP video stream into simultaneous HDMI and SDI signals, connecting your IP-based media network into baseband presentation or distribution equipment. It decodes NDI High Bandwidth, NDI HX, NDI HX2, and NDI HX3 streams, along with RTSP, HTTP, HLS, RTMP, and MPEG-TS over UDP/SRT/RTP, so a single decoder can pull from a wide range of NDI and streaming sources. Output runs up to 1920x1080 60fps over both HDMI and SD/HD/3G-SDI at the same time, with 8-channel 48KHz audio on each. The SDI signal can be transmitted over 130m of cable. The device can be powered over its network connection via PoE, or via the included USB power adapter, giving installers flexibility in how it's wired into a rack or AV setup. Configuration is handled through an intuitive Web GUI, Magewell's Control Hub, or on-board MENU/SELECT buttons, with a 16-position rotary DIP switch for setting a board index across multi-unit installs. HTTP-based APIs, Crestron Plugins, and Q-SYS Control Plugins are available for custom integration into existing control systems. Product Q&A Q: What does this device actually do? A: It receives a live NDI or IP video stream from your network and converts it into HDMI and SDI signals at the same time, so you can feed a single NDI source (a camera, a switcher output, a media player, or streaming software) straight into both an HDMI display and an SDI-based switcher or recorder simultaneously, without needing two separate decoders. Q: Does it output HDMI and SDI at the same time, or do I have to choose one? A: Both outputs run simultaneously from the same decoded stream, up to 1920x1080 60fps on each, so you can feed HDMI and SDI equipment from a single unit without switching between them. Q: Does it need a separate power supply, or can it run on PoE? A: Both are supported. You can power it with the included power adapter via the USB Type B port, or run a single Ethernet cable from a PoE (IEEE 802.3af) switch or injector for combined power and network in one connection. Q: What NDI sources and streaming protocols can it decode? A: It decodes NDI 6.3, NDI High Bandwidth, NDI HX, NDI HX2, and NDI HX3, along with RTSP, HTTP, HLS, RTMP Pull/Push, and MPEG-TS over UDP/SRT/RTP, so it works with most NDI-enabled software and hardware as well as many common streaming sources. Q: Can I run more than one of these on the same network? A: Yes. Each unit has a 16-position rotary DIP switch to set a board index, and the on-board MENU/SELECT buttons or the Web GUI let you pick which NDI source it decodes, so multiple units can be configured and told apart easily in larger installs. Specifications SKU 642100000 Function NDI / IP stream to simultaneous HDMI and SDI decoder Max Output Resolution 1920x1080p60 (HDMI and SDI simultaneously) HDMI Output HDMI 1.4, up to 1920x1080p60, delivers within 2K at the preferred format per connected monitor's EDID, supports YUV BT.601/BT.709 SDI Output SD/HD/3G-SDI BNC, supports ST 259/292/425 (3Ga/3Gb/3Gb-DL/3Gb-DS) standards, formats from 720x480i59.94 up to 1920x1080p60 Audio Output 48KHz, 16-bit, 8-channel on both HDMI and SDI SDI Transmission Distance Up to 130m (427ft) Decoding Formats Up to 2Kp60: NDI High Bandwidth, NDI HX, NDI HX2, NDI HX3, RTSP, HTTP, HLS, RTMP Pull/Push, MPEG-TS over UDP/SRT/RTP Video / Audio Decoders SpeedHQ / H.264 / H.265 video, AAC / MP3 audio NDI Version NDI 6.3 Network Interface 10/100/1000Mbps Ethernet with IEEE 802.3af PoE USB Interface USB2.0 Type B (5V/2.1A power supply, USB RNDIS/ECM) On-Board Controls MENU and SELECT buttons, 16-position rotary DIP switch (board-index 0-F) LED Indicators Power LED (on = connected), Decode LED (on = decoding, blinks = error, off = no source selected) Dimensions 100.9 x 60.2 x 23.3mm (L x W x H) Power Consumption ~5.5W max (5V, ~1.05A) Operating Temperature 0 to 40°C Storage Temperature -20 to 70°C Relative Humidity 5% to 90%, non-condensing Included Accessories Power adapter (US/EU/UK/AU/JP), USB Type A to Type B cable, L-bracket Warranty 2 years Country of Origin China User Manual PDF Quick Start Guide PDF Compatibility Decodes NDI and IP streams from any source supporting NDI High Bandwidth, NDI HX, NDI HX2, NDI HX3, RTSP, HTTP, HLS, RTMP, or MPEG-TS over UDP/SRT/RTP, and outputs simultaneously to any HDMI 1.4 compatible display or capture device and any SD/HD/3G-SDI compatible display or distribution device. NDI Source Compatibility NDI 6.3, NDI High Bandwidth, NDI HX, NDI HX2, NDI HX3 Streaming Protocol Compatibility RTSP, HTTP, HLS, RTMP Pull/Push, MPEG-TS over UDP/SRT/RTP HDMI Output Compatibility Any HDMI 1.4 compatible display or capture device SDI Output Compatibility Any SD/HD/3G-SDI compatible display or distribution system Web Browser Compatibility Internet Explorer, Edge, Firefox, Chrome, Safari, Opera Control System Compatibility Crestron Plugins, Q-SYS Control Plugins, HTTP-based APIs, Magewell Control Hub