Yamaha MT-09 MT09 SP Titanium Front Brake Disc Rotor Bolts, 2013-2025, Blue

High-performance titanium front brake disc bolts from RSR Moto. Suitable for the following Yamaha models: MT-09, all variants MT-09 SP, all variants Product Information Durable and attractive anodised blue coating Equivalent Yamaha part number: 90109-06254-00/90109-064G6-00 Guaranteed not to rust or otherwise corrode Precision made from aerospace-grade 6Al-4V titanium 40% lighter than steel equivalents Attractive fade-free polished finish Forged shank for higher tensile strength, better yield strength, and improved fatigue resistance Rolled threads for enhanced fatigue resistance and superior protection against galling Accurately formed heads for close tool matching and easy installation/removal Pack contents: x10 bolts Installation Use an M6x1.00mm tap to clean out the threads on your wheel. Please note, old thread lock can cause the new bolts to bind and snap when torque is applied. It is imperative that the receiving threads are clean Use a hex key to drive each bolt into its hole using only your fingers. The bolt should go all the way in without snagging. If it does not, clean the thread again and repeat until the bolt goes in smoothly Remove the bolt, apply thread lock, and drive it in until it is finger tight Repeat until all the bolts are seated Tighten the bolts in a star pattern using a torque wrench to apply 10 N/m Complete the installation by torquing the bolts to 18 N/m Please note These bolts are precision-manufactured from Grade 5 titanium, which differs in material properties from the original steel bolts supplied by motorcycle manufacturers. For this reason, it is essential to follow the torque settings provided with the bolts, not those listed in the workshop manual or other sources Using excessive torque may result in bolt failure during installation International Customers Postage costs are automatically combined when you order more than one item from us All items are sent by fully tracked airmail Specification Tensile strength: Heat treated to 950Mpa~1000Mpa Yield strength: 870Mpa~925Mpa Hardness: 30 HRC-40HRC Shear strength: 500Mpa~550Mpa Elongation: 14%~18% Working temperature: Up to 500°C Why RSR Moto Titanium? Race-proven products at competitive prices No-quibble full money-back guarantee on all products Same-day dispatch on orders received before 3.30pm (Mon-Fri) Industry-leading levels of customer service All enquiries are answered promptly and courteously