Oppila AGX Orin MIPI CSI-2 Bridge Board

AGX Orin MIPI CSI-2 Bridge Board Spec Sheet The Oppila AGX Orin MIPI CSI-2 Bridge Board (manufacturer part number FC-AGX-LGHM) connects compatible LVDS, HDMI, dual-channel GMSL3 and native MIPI CSI-2 cameras to the NVIDIA Jetson AGX Orin. Its four camera interface paths connect through a 120-pin camera expansion connector, providing four 4-lane CSI-2 links with 16 lanes in total. LVDS and HDMI inputs convert camera video to MIPI CSI-2 and provide VISCA control through an I²C-to-UART bridge. The GMSL3 interface combines two camera links, supports Power over Coax and remains backward compatible with GMSL2 cameras. A native 22-pin MIPI CSI-2 connection provides direct sensor pass-through for embedded vision, robotics and industrial imaging projects. Features: LVDS, HDMI, dual-channel GMSL3 and native MIPI CSI-2 interfaces on one board Four independent 4-lane CSI-2 host links HDMI video up to 4K60 and LVDS video up to 1080p60, depending on the camera VISCA camera control over host I²C-to-UART for LVDS and HDMI ports Independent camera power switching for LVDS and HDMI interfaces GMSL3 Power over Coax support and GMSL2 backward compatibility Native 22-pin, 4-lane MIPI CSI-2 pass-through 12–24 V DC input with reverse-voltage and transient-voltage protection Applications: Embedded AI and multi-sensor vision Robotics and autonomous platforms UAV camera payload development Industrial inspection and machine vision Research, evaluation and rapid prototyping Technical Specifications: Manufacturer part number FC-AGX-LGHM Supported host NVIDIA Jetson AGX Orin Developer Kit Host connector 120-pin Samtec QTH-060 series camera expansion connector Host CSI-2 links Four 4-lane interfaces; 16 lanes total LVDS input 30-pin KEL, LVDS single mode; up to 1080p at 60 fps, camera dependent HDMI input 30-pin KEL, HDMI micro-coax interface; up to 4K at 60 fps, camera dependent GMSL input Two GMSL3 camera links; GMSL2 backward compatibility; MATE-AX dual coax with breakout cables to FAKRA GMSL output Two camera links aggregated into one 4-lane MIPI CSI-2 output Native MIPI input 22-pin FPC; 4-lane MIPI CSI-2 pass-through Camera control VISCA over 3.3 V CMOS UART bridged to host I²C for LVDS and HDMI; external UART header provision Validated LVDS camera examples Sony FCB-EV9520L / FCB-EV9500L, Tamron MP3010M-EV, KT&C ATC-HZ5540T-LP Validated HDMI camera examples Sony FCB-ER9500 / FCB-ER8530 / FCB-EW9500H Input voltage 12–24 V DC regulated Recommended supply 12 V / 3 A regulated Power connector Molex Micro Fit+ 2-pin Electrical protection Reverse-voltage and transient-voltage protection Dimensions (L × W) 84.87 × 61.95 mm Weight 38.4 g Operating temperature –20°C to +85°C Power indicator Green LED Listed compliance MIPI CSI-2 specification; RoHS Camera compatibility and combined video throughput depend on the selected cameras and system configuration. Please include your camera models and Jetson software version when requesting a quote.