Amethyst Purple EPDM Granules | Wet Pour Rubber Safety Surfacing | 1kg & 25kg

Amethyst Purple EPDM Granules — Premium Wet Pour Safety Surfacing Material Amethyst Purple EPDM Granules are high-grade ethylene propylene diene monomer rubber granules designed for use as the decorative top layer in wet pour rubber safety surfaces. Vibrant, impact-absorbing, and fully permeable, these granules are the professional choice for playground surfaces, school grounds, parks, and recreational areas across the UK. Mixed with a polyurethane resin binder and applied as the upper layer over an SBR sub-base, Amethyst Purple EPDM creates a smooth, jointless, and visually striking safety surface that meets critical fall height requirements. Key Specifications Colour Amethyst Purple (RAL 4005) Available Sizes 1kg sample bag | 25kg full bag Material EPDM (Ethylene Propylene Diene Monomer) Rubber Application Top layer of wet pour rubber surfacing systems Certification EN:1177 Impact Absorbing Playground Surfacing Permeability Fully permeable — water drains through naturally Min. Top Layer Depth 15mm (over SBR sub-base) Compatible Binder Polyurethane resin binder (mix ratio 5:1) Why Choose EPDM Granules? EN:1177 certified — meets international safety standards for playground impact absorption Impact absorbing — cushions falls and reduces injury risk, critical fall height from 1.4m+ Fully permeable — rainwater drains naturally through the surface, no waterlogging UV stable colour — Amethyst Purple tone remains vibrant in direct sunlight without fading Wheelchair accessible — smooth finished surface fully supports wheelchair use Low maintenance — sweep debris, occasional wash with warm soapy water Versatile — suitable for full installations or use in graphic designs and patterns Applications School and nursery playground surfaces Public parks and recreational areas Holiday parks, resorts, and leisure centres Pool surrounds and water play areas Sports courts and multi-use games areas Decorative graphic inlays and design features Installation Overview Prepare sub-base → lay SBR base layer (20–100mm depth depending on fall height) → mix EPDM with binder in forced-action mixer → spread EPDM top layer (min 15mm) → smooth with trowel → allow 24–48 hours cure before light use, 7 days for full cure. Order a 1kg sample to check colour match before committing to a full 25kg bag.