N‑channel power MOSFET – 30 V / 90 A

This is a TO‑220 N‑channel power MOSFET designed for switching relatively high currents and moderate voltages. It can typically handle up to about 30 V between drain and source and continuous drain currents around 90 A, making it suitable for driving motors, LEDs, heating elements, or power‑rail switching in maker projects. Key specs (typical) Type: N‑channel enhancement‑mode power MOSFET Voltage: Up to 30 V drain‑source maximum (VDS). Current: Roughly 90 A continuous drain current depending on heatsinking and PCB layout. Resistance when on: Very low RDS(on), about 4 mΩ at suitable gate voltage, so it wastes little power as heat. Gate threshold: Threshold voltage below 2 V, allowing direct control from 3.3 V or 5 V microcontrollers without a separate gate driver. Typical use Switching heavy loads such as DC motors, high‑power LED strips, or solenoids from a low‑voltage logic signal. Note: Exact part number (for example, IRLB8721‑style or STP60NF03‑style) and safe operating area depend on the manufacturer; always check the datasheet. Disclaimer: The images shown are for illustration purposes only and may not be an exact match.