CellarPro Air Handler 4500 Vertical #36296

CellarPro® · Ducted Air Handler Systems CellarPro Air Handler 4500 Vertical Self-contained ducted cooling system for wine cellars up to 1,250 cubic feet 1/2 Ton Vertical Configuration 8" Ducted ETL Certified Variable-Speed EC Fans Electrofin-Coated Coils Programmable LED Thermostat ETL Certified to UL Standards 1/2 Ton Nominal Capacity 4,328 BTUH High Speed 100 ft Max Equiv. Duct Run >90% Sensible Heat Ratio Overview As an authorized CellarPro dealer, Wine Cellar HQ offers the CellarPro Air Handler 4500 Vertical, a self-contained ducted cooling system engineered to provide maximum cooling power and adjustable humidity control for wine cellars up to 1,250 cubic feet. Its vertical configuration is built for installations where floor space is limited, and it ships fully charged with refrigerant and ready to use out of the box. Key Features Independent, energy-efficient variable-speed EC fans on both the cold and hot sides, with variable fan speed settings for your choice of cooling power Extra-large coils for maximum cooling power inside the cellar Commercial-grade Electrofin coating protects the evaporator coils against leaks and corrosion Extra-large 1/2 inch drain line, amply sized to reduce condensate blockages Intuitive LED display panel with a digital programmable thermostat, temperature set point range of 47°F to 62°F when the unit is properly sized Energy-saver mode, quick-chill mode, and auto-defrost cycle Audible and visual alarms plus a maintenance-needed indicator Remote bottle probe, air filter, and duct adapters included as standard equipment Factory-installed expansion valve for maximum operating precision and range Removable steel case and refrigerant access valve for straightforward servicing access Compressor heater included for protection in environments down to 20°F Operates with minimal vibration and less noise than comparable units from competitors Sensible heat ratio greater than 90%, delivering maximum cooling power without stripping cellar humidity Technical Specifications Specification Detail Nominal capacity 1/2 Ton Cooling capacity (Sensible BTUH @ 55°F) 3,607 BTUH low / 3,975 BTUH medium / 4,328 BTUH high fan speed Dimensions 18 5/8"W x 18 5/8"D x 37 7/8"H Weight 212 lbs Ducting 8 inch; evaporator and condensing unit can each be ducted up to 100 equivalent feet (50 equivalent feet per duct) Electrical Two 110V/60Hz plug-in power cords — compressor cord 7.4 amps (dedicated 15A circuit), other components 3.2 amps (dedicated 15A recommended); both may share a dedicated 20A circuit Noise level, evaporator (ducted) 38 dBA low / 44 dBA medium / 52 dB high Noise level, condenser (ducted / non-ducted) 43 / 56 dBA low, 50 / 63 dBA medium, 55 / 68 dBA high Installation & Environmental Requirements Designed for internal installations; the vertical configuration suits locations with limited floor space Maintains optimal cellar temperature and humidity in ambient conditions up to 110°F Fresh air intake for the condenser cannot come from the wine cellar space, it must come from space outside the cellar Intended for properly constructed wine cellars that are adequately insulated, airtight, and sealed with a vapor barrier Cellar capacity above is calculated assuming R19 insulation throughout the cellar, 55°F inside the cellar, and 85°F outside the cellar; cold-side ducting, glass and/or uninsulated walls, extreme humidity, altitude, and other factors can affect actual sizing — ask your Wine Cellar HQ representative if your cellar falls outside these conditions Downloads & Resources Spec Sheet PDF download Owner's Manual PDF download Optional Upgrades This unit can be configured with an integrated heater, integrated humidifier, remote wired LED display kit, a networkable thermostat, bottle probe extension cords, and a fan cycling switch for installations that see temperatures below 20°F. Ask your Wine Cellar HQ representative for current options and pricing. Backed by CellarPro's 2-year full system warranty and 5-year compressor warranty, protecting the unit against manufacturing defects. An extended warranty option is also available. Ships strapped to a pallet via common carrier with curbside delivery. Typical processing time is 5-10 business days.