OXVA NeXlim 2 Mini Vape Kit

The OXVA NeXlim 2 Mini is the compact version of the NeXlim 2 — same UNITECH 3.0 dual mesh pod system, stripped back to a lighter, simpler device. It runs a 1500mAh battery with a 5–30W output range in an aluminium body weighing around 59g / 61g, which is roughly two-thirds the weight of the full-size kit. There's no colour screen here. A three-colour LED shows battery status instead — green for a good charge, amber for medium, red when it's time to plug in. That's the trade: you lose the wattage readout and the themes, you gain a genuinely pocketable device at a lower price. NeXlim 2 Mini vs NeXlim 2 — which one? Both use exactly the same replacement pods, so if you already own a NeXlim 2 your spare pods carry straight over. NeXlim 2 Mini NeXlim 2 Battery 1500mAh 2000mAh Output 5–30W 5–40W Charging 2A USB-C 3A USB-C Display 3-colour LED 0.85" colour screen Modes Eco + Boost Smart + Eco + Power Body Aluminium Zinc alloy + PCTG Weight approx. approx. 88g Pods in box 1 × 0.8Ω 2 × (0.6Ω + 0.8Ω) Pods Shared — identical UNITECH 3.0 pods Choose the Mini if you want the lightest, simplest device and mostly vape MTL. Choose the full-size NeXlim 2 if you want wattage control, a screen, a bigger battery and both pod resistances in the box. Battery and charging The 1500mAh battery comfortably covers a full day of normal vaping. In Eco Mode with light use, OXVA quotes up to seven days between charges — that's a best-case figure for occasional vaping rather than what a regular all-day vaper should expect, but it does show how much Eco Mode stretches the cell. 2A USB-C charging brings it to around 80% in 30 minutes, with a full charge in about 45 / 55 minutes. Two modes, no fiddling Eco Mode drops the output to conserve battery and e-liquid — less vapour, much longer between charges. Boost Mode runs at the top of the 5–30W range for the fullest flavour and most vapour. Vaping itself is draw-activated, so there's nothing to press to take a puff. The airflow slider on the side lets you tighten the draw for a cigarette-like MTL inhale or open it up slightly. Pods and coils The Mini takes OXVA NeXlim UNITECH 3.0 pods — the same 2ml TPD pods as the full NeXlim 2, with a built-in dual mesh coil. Dual mesh means two mesh surfaces firing together for a wider heating area, which gives more consistent flavour and better coil life than a single-mesh pod. One 0.8Ω pod comes in the box. Pod Best wattage Draw style E-liquid 0.8Ω (included) 16–30W MTL / light RDL 20mg nic salt or 50/50 freebase 1.2Ω (sold separately) 13–22W Tightest MTL, most cigarette-like 50/50 freebase 0.6Ω 22–40W RDL Who it suits Coming off disposables — the 1.2Ω or 0.8Ω pod with a 20mg nic salt gives the closest match to a disposable's draw Want something genuinely pocketable — this is the lightest device in the NeXlim range Already own a NeXlim 2 — as a second or backup device it shares your existing pods Want simplicity — two modes, no wattage menus Specifications Battery: 1500mAh, built-in Output: 5–30W Modes: Eco and Boost Charging: 2A USB Type-C Battery indicator: 3-colour LED (green / amber / red) Airflow: Adjustable side slider Activation: Draw-activated Pods: NeXlim UNITECH 3.0, 2ml TPD, dual mesh Pod included: 0.8Ω Compatible e-liquid: Nic salts and 50/50 freebase Material: Aluminium Dimensions: approx. 113 × 28.5 × 18mm Battery life varies with mode, wattage and how heavily you vape. What's in the box 1 × OXVA NeXlim 2 Mini device 1 × NeXlim UNITECH 3.0 pod, 0.8Ω 2ml 1 × User manual How to set up your NeXlim 2 Mini Charge the device with a USB-C cable. The LED turns green when it's ready. Peel the sticker off the base of the pod. Fill the pod through the fill port [VERIFY: top / side]. Prime it. Leave the filled pod standing for 10 minutes so the e-liquid soaks into the cotton. Skipping this is the single most common cause of a burnt first puff. Insert the pod — the device sets the power level for you. Inhale to vape. No button press needed. Adjust the airflow with the side slider to tighten or loosen your draw. Frequently asked questions Which pods fit the OXVA NeXlim 2 Mini? It uses OXVA NeXlim UNITECH 3.0 pods — the same pods as the full-size NeXlim 2, so one pod order covers both devices. How long does the battery last? A full day of normal vaping from the 1500mAh battery. Eco Mode extends that considerably — OXVA quotes up to seven days for light use. Charging reaches 80% in around 30 minutes. What do the LED colours mean? Green means a good charge, amber means medium, and red means it's time to recharge. What's the difference between the NeXlim 2 Mini and the NeXlim 2? The Mini has a 1500mAh battery, 5–30W output, an LED indicator and an aluminium body. The full-size has 2000mAh, 5–40W, a 0.85" colour screen, faster 3A charging and two pods in the box. Both use identical pods. Can I use nic salts? Yes. The included 0.8Ω pod works well with 20mg nic salt or 50/50 freebase. Why does my new pod taste burnt? Almost always under-priming. Fill the pod and wait a full ten minutes before the first draw.