Güde GH 5.6-50 Petrol Garden Shredder

Güde GH 5.6-50 garden shredder – Belt drive, rotating discharge chute, 50 mm The GH 5.6-50 differs from the GH 651 B in one essential design choice: the V-belt drive instead of direct coupling. This system allows elastic adjustment of the rotation speed according to the load, protecting the engine from sudden overloads. If a branch gets jammed, the belt “slips” instead of blocking the engine, ensuring greater longevity. The rotating discharge chute (instead of a fixed one) makes it possible to direct the shredded material into bags or piles without moving the whole machine: an ideal solution for semi-stationary facilities and small nurseries where space is limited. The capacity is slightly lower than the GH 651 B (50 mm fresh, 30 mm dry vs 76 mm of its larger brother), but sufficient for most semi-professional gardening operations. The higher weight (81 kg) reflects a more robust structure, suitable for continuous operation without clogging. Safety and control: ignition switch and oil protection The GH 5.6-50 integrates two features absent from entry-level models: On/off switch: unlike the pull-start system of the GH 651 B, this model offers lever starting and instant shutdown, reducing risks during short breaks. Emergency stop switch: cuts off the fuel supply and disables ignition in the event of an accident. Low-oil protection: an automatic sensor stops the engine if the oil drops below the threshold, preventing damage caused by insufficient lubrication. Who chooses it: three concrete profiles Small semi-professional nursery: Daily shredding of pruning waste and nursery scraps. The rotating chute enables efficient collection of chips in piles for composting. The belt drive reduces mechanical wear during 4–6 hours of daily work. Public administration with green-area depot: Public gardening, municipal parks, schools with green areas. Integrated safety controls (emergency stop, oil protection) reduce civil liability and injuries. Euro 5 standard meets municipal regulations. Farm with fixed composting area: Certified green waste, volume reduction before disposal. Machine stability and adjustable chute facilitate repetitive daily operations. Who the Güde GH 5.6-50 is suitable for ProfileSuitable?Reason Semi-professional nursery / small depotIdeal50 mm branches, rotating chute for piling, belt drive, 6+ hour operation Public administration / public facilityIdealIntegrated safety, emergency controls, automatic oil protection, Euro 5 Farm with composting areaSuitable50 mm capacity is sufficient; not an ultra-heavy industrial category Not recommended for: Mobile/itinerant operators (81 kg weight, 1,280 mm length); very large branches (max 50 mm); very tight spaces; occasional use (operation requires more maintenance than entry-level models). Technical specifications Engine and fuel ParameterValue Engine design4-strokeEngine power (P1)4.1 kWEngine power (HP)5.6 HPDisplacement212 cm³Engine speedmaximum 3600 rpmEngine typeS 635 V power engineFuelUnleaded petrolTank capacity3.6 litresEngine oil0.6 litres SAE 10W40Starting systemLever start (on/off) Capacity and processing ParameterValue Maximum branch diameter (fresh)50 mmMaximum branch diameter (dry)30 mmTransmissionV-belt (elastic, overload protection)Discharge chuteRotating (adjustable without moving the machine)Processing speedVariable according to loadEmissions (CO²)859.32 g/kWh Controls and safety ParameterValue On/off switchYes (lever control)Emergency stop switchYes (cuts power instantly)Low-oil protectionAutomatic (stops the engine if oil is insufficient)Splash guardOn the branch feed openingGuide barsYes (for operator safety)Noise level (LWA)110 dBEmission complianceEuro 5 Structure and mobility ParameterValue FrameRobust and stableWheelsLarge pneumatic tyres (for rough terrain)HandlebarPresent (facilitates manoeuvrability)Length1,280 mmWidth500 mmHeight1,205 mm Dimensions and weight ParameterValue Total length1,280 mmTotal width500 mmTotal height1,205 mmNet weight81 kgGross weight (packaging)95 kg Compliance CE – Machinery Directive 2006/42/ECEuro 5 – Emission standard for internal combustion enginesSafety standard for powered equipment with emergency controls Standard equipment S 635 V power engine (pre-assembled, factory tested)V-belt driveRotating discharge chute3.6-litre fuel tankEngine oil housing with 0.6-litre capacityOn/off switch with leverEmergency stop switchAutomatic low-oil protection sensorLarge pneumatic tyres (pre-mounted)Transport handlebarSplash guard on the branch openingSafety guide barsItalian instruction manualKrollit warranty certificateCE conformity certificate Frequently asked questions 1. What is the difference between GH 5.6-50 and GH 651 B? The GH 5.6-50 has a V-belt drive (vs direct coupling on the GH 651 B), rotating chute (vs fixed), on/off switch (vs pull-start), automatic oil protection, weight 81 kg (vs 74 kg), length 1,280 mm (vs 830 mm). Capacity is 50 mm fresh vs 76 mm on the GH 651 B. Additional details: GH 5.6-50: semi-stationary, integrated safety, suitable for nurseriesGH 651 B: mobile, itinerant professional use, maximum capacitySame S 635 V engine, same 4.1 kW powerDifferent usage scenarios 2. Why is the V-belt drive better? The belt offers elasticity: if a branch gets jammed, the belt slips, protecting the engine from sudden blockages. It reduces mechanical wear, extends machine life, and allows continuous speed adjustment according to the load. The engine does not suffer instant torque peaks. Additional details: Shock absorption during overloadBelt maintenance every 100 hours (tension check)Replacement every 2 years or 500 hoursProtection of internal components 3. What is the rotating discharge chute for? It allows the shredded material (chips, wood) to be directed toward bags, piles, or composting areas without moving the whole machine. In a small nursery or depot with limited space, it is essential for operational efficiency. The 360° chute rotates to reach different destinations. 4. How does the emergency control work? The emergency stop switch instantly cuts off the fuel supply and disables ignition. It is used in dangerous situations (trapped branch, operator at risk). It is not a substitute for good safety practices, but it reduces damage in the event of an accident. 5. Is it better for fresh or dry branches? Both, but the capacity differs: fresh branches up to 50 mm, dry branches up to 30 mm. Fresh wood is preferable (the bark facilitates shredding), but dry wood is processed just as effectively. Adjust engine speed according to the load: very hard branches require reduced speed. 6. Is low-oil protection important? Very much so. An engine without sufficient lubrication can be damaged in seconds (seizure). The automatic sensor stops the engine if the level drops below the threshold, preserving the unit. It is one of the key features for semi-stationary machines used continuously. 7. Is fuel consumption similar to the GH 651 B? Yes. Same S 635 V engine, 212 cm³ displacement, 4.1 kW power → consumption approximately 2–3 litres/hour at medium load. 3.6 L tank → 1.5–2 hours of continuous work. The belt drive causes minimal energy loss, so consumption is almost identical to the GH 651 B.