30kVA Step Up Transformer Industrial Power Converter 3-Phase to 3-Phase

Maximum Resistive Load Capacity: 24kVA Maximum Inductive Load Capacity: 18kVA 3-Phase to 3-Phase Autotransformer Product Dimensions: 20" (L) × 17" (W) × 21" (H) Gross Weight: 100 KG (approximately 220 lbs) The maximum resistive load capacity must be limited to 80% (×0.8), and the maximum inductive load capacity must be limited to 60% (×0.6). Do not exceed these limits. Features: * High-efficiency copper/aluminum winding design for stable voltage transfer and reduced power loss * Heavy-duty steel enclosure for industrial environments * Built-in ventilation for improved heat dissipation during continuous operation Installation Requirements: * Please verify input voltage, output voltage, frequency, and load requirements before installation and operation. * Must be properly grounded before operation * Installation must be performed by a qualified electrician familiar with 3-phase electrical systems * Compatible with grounded industrial power systems *esigned for indoor dry-location use unless additional weather protection is provided Type: Industrial Autotransformer, 3-Phase Input to 3-Phase Output Autotransformer design: single winding where the primary and secondary share part of the same coil. Electrical Connection: Direct electrical connection between input and output. An autotransformer uses a single coil with taps at different points to adjust voltage levels. Important Safety Notice: Because the primary and secondary share a common connection, extra caution is required. If the neutral connection fails or insulation breaks down, full input voltage may appear on the output side. This can damage sensitive equipment and create a serious shock hazard. Suitable Applications: * Industrial equipment * CNC machines * Laser systems * Motors * Pumps * Compressors * Other heavy-duty 3-phase electrical equipment