Mapefloor I 500 W is a Two-Component, Coloured, Water-Based Epoxy Coating

Mapefloor I 500 W is a Two-Component, Coloured, Water-Based Epoxy Coating Mapefloor I 500 W is a high-performance, two-component epoxy coating formulated in water dispersion to provide a hard-wearing, attractive finish on concrete and cementitious substrates. Designed for use in internal environments, it offers excellent resistance to wear, abrasion, and light chemical exposure. Thanks to its low odour and low VOC formulation, it is particularly suitable for use in enclosed or occupied areas such as warehouses, garages, workshops, plant rooms, and light industrial spaces. It can be used as part of complete resin flooring systems or applied directly to prepared concrete surfaces to improve durability, cleanliness, and appearance. Key Features Two-component, water-based epoxy coating Coloured, semi-gloss finish Low odour – ideal for indoor use Low VOC formulation Good resistance to abrasion and wear Resistant to light chemical exposure Easy to apply by roller Suitable for concrete and cementitious substrates Creates dust-free, easy-to-clean surfaces Recommended Uses Mapefloor I 500 W is suitable for: Coating concrete floors in warehouses and storage areas Workshops, garages, and plant rooms Commercial and light industrial environments Internal areas requiring durable, hygienic finishes Use within Mapefloor System 53 Surfaces previously treated with compatible epoxy primers Application Surfaces must be clean, sound, and properly prepared before application. Apply over a suitable primer such as Mapecoat I 600 W Mix the two components thoroughly using a low-speed mixer Dilute with water as specified depending on application Apply using a roller in one or more coats depending on system requirements Allow each coat to dry before applying subsequent layers. Coverage Approximate consumption: 0.20 – 0.40 kg/m² per coat (52m² to 65m²) (depending on substrate condition and application method) Technical Data Type: Water-based epoxy coating Mix ratio: Component A : B = 1 : 1 Pot life: Approx. 2 hours Application temperature: +8°C to +35°C Dust dry: Approx. 4–6 hours Recoatable: Approx. 12–24 hours Full cure: Approx. 7 days Packaging Available in: 26 kg kit Storage Store in original packaging in a dry place between +5°C and +30°C. Protect from frost. Shelf life up to 24 months. Important Notes Do not apply on damp or contaminated substrates unless using a suitable primer Avoid application in high humidity or condensation conditions Protect freshly applied product from water and traffic during curing Always follow manufacturer guidelines for best results Why Choose Mapefloor I 500 W? If you need a reliable, low-odour epoxy floor coating that performs in demanding environments while remaining easy to apply, Mapefloor I 500 W is an excellent choice for professional and commercial flooring projects.