Anelli Tre Large — Three-Tier Alabaster Ring Chandelier in Solid Brass | CLVC0212L

Three rings of stone, suspended on light. Three concentric alabaster rings, descending in size, hung from invisible steel cable on a solid brass canopy. The rings are not stacked — they're staggered through space, each tier suspended at a different height, so when you look up the composition reads as motion rather than as architecture. From below, the alabaster glows from within: each ring is internally lit by integrated LED, which means the stone itself becomes the light source rather than housing one. Where it actually belongs: [LARGE — 59"] Above a 14–18 seat dining table in a formal dining room with 14+ ft ceilings. Centered in a grand foyer or stair landing where the full diameter of the lowest ring (5 feet) makes the room. In a hospitality-scale residential space — primary great room, ballroom-scale entry, or atrium where you want the ceiling to feel composed rather than empty. About the alabaster. Each ring is hand-cut from solid Italian alabaster — not segmented, not assembled from pieces. A single ring at this scale is a feat of stone-cutting: the alabaster is selected from blocks large enough to yield the full diameter, hollowed to the right wall thickness for even light transmission, and finished by hand. The veining of each ring is unique to the block it came from, and the three rings in a single chandelier are not matched to one another — they're allowed to vary, the same way real stone always varies. When the LED is lit, the alabaster glows from within rather than from the surface. The mineral structure of the stone diffuses the light unevenly, so every ring has its own pattern of brighter and softer regions — the visible signature of natural material rather than a manufactured diffuser. The light source. Integrated LED inside each ring, default 2700K warm white — the temperature that brings out the warm honey tones in alabaster and reads as candlelight in a dining context. The LED is dimmable on standard TRIAC 120V dimmers (the most common US residential dimmer protocol; works with Lutron Caseta and most home automation systems). Rated for 50,000 hours — roughly 17 years at 8 hours of daily use. When the LED eventually reaches end-of-life, the strip is user-replaceable through the access points on the back of each ring. This is deliberate. We don't make disposable fixtures. Customization. Color temperature — 2700K (default), 3000K, 4000K, or 6000K. Specify at checkout. The cooler temperatures (4000K, 6000K) work for contemporary kitchens, commercial-residential hybrid spaces, and modern minimalist rooms; warmer temps (2700K, 3000K) for traditional dining, living, and bedroom contexts. Pick the temperature for the room, not the fixture. Canopy finish — solid brass (default), stainless steel (matches silver/nickel-toned hardware throughout the room), or matte black. Specify at inquiry. Alabaster veining — more / less / random selection at checkout. About the suspension. Each ring is hung independently on multiple thin stainless steel cables from a single brass canopy. The cables are visible by design — they read as quiet vertical lines that disappear against light walls and become a graphic element against dark ones. Cable length is adjustable at installation: your electrician can shorten the cables to set the rings at the right heights for your specific ceiling. Small Medium Large Largest ring diameter 39.4" / 100cm 47.2" / 120cm 59" / 150cm Middle ring diameter 23.6" / 60cm 31.5" / 80cm 39.4" / 100cm Smallest ring diameter 15.7" / 30cm 15.7" / 40cm 19.7" / 50cm Approx. weight 35 lbs / 16 kg 55 lbs / 25 kg 88 lbs / 40 kg Total LED wattage ~75W ~120W ~180W Material: Hand-cut Italian alabaster + solid brass canopy (stainless steel canopy on request) + stainless steel suspension cables Canopy finish: Solid brass (default) / stainless steel / matte black on request Light source: Integrated LED, user-replaceable, rated 50,000 hours Color temperature: 2700K (default) / 3000K / 4000K / 6000K — specify at checkout Wiring: Hardwired, UL listed for US 120V, CE certified for 220V EU Dimmable: Yes — TRIAC 120V AC compatible (works with Lutron Caseta, standard US residential dimmers, and most home automation) Suspension: Multiple stainless steel cables; cable length adjustable at installation Total drop: Configurable — the rings stagger across approximately 24" of vertical space below the canopy, with cable length determining final height Mounting: [SMALL: standard junction box typically sufficient given weight; confirm with electrician.] [MEDIUM/LARGE: requires reinforced ceiling blocking — standard residential junction box (50 lb rated) is not sufficient. Licensed electrician with structural access required.] Origin: Designed in Torino, Italy Note: Alabaster is a natural material; veining variation between rings and between fixtures is intrinsic and part of the piece's character.