Speed Nut for Dillon Powder Measure Failsafe Rod

The Speed Nut was created to eliminate one of the most tedious and irritating steps in setting up, installing, or removing the Dillon Powder Measure — dealing with the butterfly nut and its sharp metal insert used to adjust the Failsafe Rod. Our redesigned Speed Nut removes that hassle entirely. With a simple press of a button, the internal threads disengage, allowing you to slide the nut off or back on in seconds. Release the button, and it locks onto the rod’s threads with a firm, precise hold, giving you fine control over your adjustments. It’s a small upgrade that delivers a surprisingly big improvement. Press the button to reposition the nut instantly, then tighten it to lock everything in place. Powder measure adjustments on your Dillon press become smoother, faster, and far more enjoyable. Hassle-free Tired of always screwing the butterfly nut on and off the Dillon failsafe rod? Our Speed Nut will take care of this, allowing you for super simple and fast setup and adjustment with the push of a button. Literally. Lock-in-place Feature The Speed Nut features a built-in locking mechanism: tightening the black knob locks it in place, preventing it from loosening during press cycling. Installation Step 1 Loosen the knob by a few turns to allow the spring-loaded insert to move through its full range. Step 2 Push the knob inward, then install the nut onto the threaded rod. Step 3 Cycle the press and adjust the nut to the desired position and tension. Step 4 Tighten the black knob clockwise to lock it in place and prevent unwanted movement. Compatibility All Presses using Dillon Powder Measure Assembly with Failsafe Rod What Comes in the Box? Speed Nut for Dillon Powder Measure - Made from aircraft-grade 7075 aluminum