Hyperion is one modular paver that scales from a patio to a driveway. The 8 × 16″ unit comes in two thicknesses — 2″ for pedestrian areas, 3.5″ for vehicular — so the same surface, in the same color, can run from a pool deck straight into the motor court with no visible change. It's pressure-cast at high density, and 3 mm surface bumpers set the joint and hold a clean drainage gap between units. Why Hyperion Most projects don't stop at one use. A driveway meets a walkway; a terrace meets a turnaround. Hyperion lets you hold one material and one palette across all of it, and rate the thickness to the load underneath each zone. Grade-set simplicity — it installs directly on a compacted base, no pedestals, no specialty hardware. Driveways, motor courts, pool decks, terraces, plazas, walkways, hospitality courtyards. Specifications Dimensions: 8 × 16 in · Pedestrian 2″ (50 mm) / Vehicular 3.5″ (88.9 mm) Weight per paver: 20.46 lb (pedestrian) / 35.8 lb (vehicular) Coverage per paver: 0.889 sq ft Compressive strength: 5,000 psi (internal target) Water absorption: < 5% Slip rating: R11+ textured HyperCast surface, wet or dry Joints: 3 mm surface bumpers set the joint automatically — simplifies installation Process: HyperCast — high-density pressure-cast · Origin: Tecate, MX · Lead time 2–4 weeks + ~1 week ship Colors Natural · Gray · Graphite · Sand. Color runs all the way through — iron-oxide pigment integrated into the concrete itself, not a surface coat. Integral color, UV-stable, no resealing to keep it. All products use natural pigment, so appearance may vary from website images. We recommend ordering a single paver as a sample before placing a full order. Finish & Add-ons HyperCast surface — Hyperion's standard pressure-cast finish. One finish; no honed or hammered option (it's a different process from the wet-cast slabs). Factory penetrating sealer — available as a separate add-on for added stain protection. Custom color — available for orders of 5,000+ sq ft. Installation Grade-set only. Compacted aggregate base 4″ min, 1″ sand or crushed-stone bedding, 3 mm bumpers set the joint automatically, 2% min slope for drainage, seal after installation. Layout patterns: vertical running bond, horizontal running bond — best for linear patterns. Two thicknesses. One surface. From the front door to the driveway.