75mm ODE STARflex Acoustic Partition Roll HP 8m x 1.2m - 9.60m2 per roll

Separating walls, deeper stud voids and floor constructions are where 75mm ODE STARflex Acoustic Partition Roll HP earns its place. It is a glass mineral wool roll from ODE, the Turkish insulation manufacturer established in 1985, built for acoustic partition applications rather than general thermal use, and at 75mm it suits builds with the void depth to take it. Each roll measures 1200mm x 8m, giving 9.60m² of coverage per roll at a density of 15 kg/m³, and like every roll in the STARflex APR HP range it is supplied pre-cut into two 600mm widths for a friction-fit between standard stud centres. It carries a sound absorption coefficient of 0.8 to 1.0 and a Euroclass A1 non-combustible reaction to fire classification to BS EN 13501-1, the highest fire rating available. Density falls as thickness rises across this range, from 24 kg/m³ at 25mm down to 15 kg/m³ here, so the thicker rolls build their acoustic layer through depth of material rather than through a denser section. In practical terms that keeps the 75mm roll light to handle and easy to friction-fit despite the extra thickness, which matters on a long partition run or overhead in a floor void. 75mm ODE STARflex Acoustic Partition Roll HP is intended for use within internal stud partitions and floor voids, wherever reducing sound transmission between rooms, units or floors is the priority. It should be installed in line with ODE's current technical guidance and the relevant project specification. Sitting second from the top of the STARflex APR HP range, it gives specifiers a deeper option short of the full 100mm. Key Benefits of ODE STARflex Acoustic Partition Roll HP: Glass mineral wool acoustic partition roll built specifically for sound control in stud partitions and floors Sound absorption coefficient of 0.8 to 1.0 Euroclass A1 non-combustible reaction to fire to BS EN 13501-1, the highest fire classification available Supplied pre-cut into two 600mm widths for a friction-fit between standard stud centres Made from over 80% recycled glass content 1200mm x 8m roll size giving 9.60m² coverage per roll at 15 kg/m³ density Suited to separating walls, deeper partition voids and floor builds where more material can be accommodated Lightweight at this thickness, staying manageable to handle and friction-fit on longer runs Reduces on-site cutting and offcut waste compared with a single wide roll Suitable for domestic and light commercial internal partition work Engineered not to degrade, decompose or become mouldy over time, per ODE Good to Know: Second thickest in the range: 75mm sits just below the 100mm option, for builds needing extra depth without going to the maximum available. Same rated performance throughout: the sound absorption coefficient and A1 fire classification are consistent across the whole STARflex APR HP range, so thickness is chosen on void depth and the partition build, not on a change in classification. Order to coverage, not roll count: at 9.60m² per roll, a 75mm run takes roughly two and a half times the rolls of the same area in 25mm. Pallet quantity is 24 packs, giving 230.40m². For partition and floor builds with real depth to spare, 75mm ODE STARflex Acoustic Partition Roll HP puts that extra space to proper use.