2014-2023 Harley-Davidson Ultra 4-Speaker Audio System | Cicada Audio

2014-2023 HARLEY-DAVIDSON ULTRA AUDIO 2014-2023 Harley-Davidson Ultra 4-Speaker Audio System | Cicada Audio | 14FLXCXX-4X4U A complete Cicada Audio upgrade built for 2014-2023 Harley-Davidson Ultra motorcycles, combining a 4-channel FLX500.4 amplifier with two pairs of CXX65.2 Pro Coaxial speakers for four total speaker locations. The system ships complete with amplifier mounting hardware and Cicada-branded grilles for both Road Glide Ultra and Street Glide Ultra, so both sets are included with every order. See Everything Included View Channel Configuration Complete 4-Speaker Ultra System 2014-2023 Road Glide Ultra / Street Glide Ultra Cicada FLX500.4 4-channel amplifier Two pairs of CXX65.2 Pro Coaxial speakers (4 total) Model-specific amp rack and grilles included H-D T-harness with Maestro AR compatibility 8 AWG amplifier power install kit Cicada Audio Ultra 4-Speaker System Overview This Garage Bagger Stereo package is built around Cicada Audio's 14FLXCXX-4X4U system, engineered specifically for 2014-2023 Harley-Davidson Ultra motorcycles. It pairs a compact 4-channel amplifier with four Pro Coaxial speakers, giving each speaker its own dedicated amplifier channel for clean, evenly powered output front and rear. Because Road Glide Ultra and Street Glide Ultra use different amplifier mounting locations and grille shapes, this system includes both the Road Glide and Street Glide amplifier racks and both grille sets in every kit, so the correct hardware is on hand no matter which model you're installing on. Harley-Davidson Fitment 2014-2023 Road Glide Ultra Includes the 14HDAR-RG amplifier mounting rack and CHDRGG Cicada-branded grille set, included in every kit. 2014-2023 Street Glide Ultra Includes the 14HDAR-SG amplifier mounting rack and CHDSGG Cicada-branded grille set, included in every kit. Factory Speaker Locations Speakers are designed for factory Harley-Davidson speaker locations on 2014-and-newer touring models. Exact fitment verification required: Confirm your motorcycle year, model, existing radio, and any prior audio modifications before ordering. Everything Included in the System Cicada FLX500.4 Amplifier One compact 4-channel amplifier producing 95 watts RMS per channel at 4 ohms, or 125 watts RMS per channel at 2 ohms. (2) CXX65.2 Speaker Pairs Four total 6.5-inch, 2-ohm Pro Coaxial speakers with Kevlar cones and PEI tweeter domes. Both Amplifier Racks Included 14HDAR-RG for Road Glide Ultra and 14HDAR-SG for Street Glide Ultra, both included in every kit. Both Grille Sets Included CHDRGG for Road Glide Ultra and CHDSGG for Street Glide Ultra, both included with mounting hardware. HDPG8K Power Install Kit 8 AWG amplifier power and ground installation kit sized for the FLX500.4. HDTSLINKAR T-Harness Harley-Davidson T-harness with Maestro AR compatibility for factory radio and steering-control integration. Confirm installation hardware: Verify amplifier mounting location, speaker wiring runs, and any additional adapters needed for your specific motorcycle before installation. Amplifier and Speaker Configuration Four Independent Channels Each of the four 2-ohm CXX65.2 speakers is powered by its own dedicated FLX500.4 amplifier channel. No bridging is required. Matched 2-Ohm Load The FLX500.4's 2-ohm rating is matched directly to the CXX65.2's 2-ohm impedance for full rated output per channel. Speaker Count Four speakers / two pairs Speaker Model Cicada CXX65.2 Speaker Impedance 2Ω per speaker Speaker Power Handling 100W RMS / 200W maximum per speaker Amplifier Output at 2Ω 125W RMS × 4 Channels Used Four (one per speaker) Bridged Operation Required No Output setup required: Set gain and crossover points using proper test equipment rather than by ear to protect the speakers and amplifier. Cicada CXX65.2 Pro Coaxial Speakers The CXX65.2 is designed specifically for factory Harley-Davidson speaker locations, combining a Kevlar cone with a PEI-dome tweeter and Cicada's V8 Dispersion Guide for wide, even coverage. 100W RMS Each speaker handles 100 watts RMS and 200 watts maximum. 2-Ohm Impedance Matched to run one speaker per FLX500.4 channel. 93 dB Sensitivity High efficiency for strong output from motorcycle amplifier power. Kevlar Cone Lightweight, moisture-resistant, and built for efficiency. PEI Dome Tweeter Moisture-resistant tweeter dome for bright, dispersed high frequencies. Rain or Shine™ Design All-weather construction built for open-air motorcycle use. Speaker Model Cicada CXX65.2 Quantity Included Four speakers / two pairs Speaker Type Two-way coaxial loudspeaker Nominal Diameter 6.5 inches Nominal Impedance 2Ω per speaker Power Handling 100W RMS / 200W maximum per speaker Sensitivity 93 dB Frequency Response 55 Hz–20 kHz ±3dB Cone Material Kevlar Tweeter 1-inch / 25mm PEI dome Mid-Bass Voice Coil 1.4-inch / 35mm Magnet N45H Neodymium Internal Crossover Built-in 6 dB crossover Mounting Diameter 5.43 inches / 138mm Mounting Depth 2.26 inches / 57mm Grilles & Hardware Included Warranty Two-year Cicada Audio warranty Verify mounting clearance: Confirm mounting diameter, depth, and grille fitment against your motorcycle before installation. Cicada FLX500.4 Four-Channel Amplifier The FLX500.4 is a compact, high-efficiency Class-D amplifier built for motorcycle installs where space is limited but clean, dedicated power per speaker still matters. 125W × 4 at 2Ω Rated output matched to the included 2-ohm speakers. 95W × 4 at 4Ω Also supports 4-ohm speaker configurations. 250W × 2 Bridged Bridged mode available for properly matched applications. Ultra-Compact Chassis Sized to fit inside fairings, saddlebags, and tight mounting locations. Adjustable Crossovers Selectable LPF/FULL/HPF with 20 Hz–20 kHz range and 6/12/24/48 dB slopes. Flexible Turn-On REM, DC, or VOX turn-on modes for factory or aftermarket sources. Amplifier Model Cicada FLX500.4 Amplifier Type Four-channel Class-D amplifier Power at 4Ω 95W RMS × 4 Power at 2Ω 125W RMS × 4 Bridged Power at 4Ω 250W RMS × 2 Operating Voltage 9V–16V Music Current Draw 50A Maximum Current Draw 80A Recommended Fuse 50A Frequency Response 20 Hz–20 kHz ±3dB Signal-to-Noise Ratio 91 dB (A-weighted) Damping Factor 200 THD + Noise 0.1% at 10% rated power (2Ω per channel) Gain Range 0.2V–12V Turn-On Modes REM / DC / VOX Crossover Modes LPF / FULL / HPF Crossover Range 20 Hz–20,000 Hz Crossover Slopes 6 / 12 / 24 / 48 dB per octave Dimensions (with brackets) 5.2 × 4.9 × 2.0 in Dimensions (chassis only) 4.0 × 4.9 × 2.0 in Power wiring verification: Confirm final power cable, ground cable, and fuse configuration against current Cicada Audio guidance before powering the amplifier. Factory Radio Integration The included HDTSLINKAR T-harness with Maestro AR compatibility integrates the amplifier with the factory Harley-Davidson radio system, supporting factory steering-control and audio integration on compatible models. Confirm compatibility: Verify Maestro AR module compatibility with your specific year and factory radio before ordering. Power Wiring and Installation Notes Disconnect the motorcycle battery before installation. Install primary fuse protection close to the positive battery terminal. Use secure, corrosion-resistant battery and ground connections. Protect wiring from steering movement, heat, and sharp edges. Keep signal wiring separated from high-current power wiring. Confirm charging-system and battery condition before high-output use. Connect one CXX65.2 speaker to each of the four amplifier channels. Set gain using measured clean output rather than by ear. Use the Road Glide or Street Glide amplifier rack and grille set that matches your motorcycle; the unused set can be kept as a spare. Professional installation recommended: Correct mounting, wiring, and gain setup protect the speakers and amplifier and improve long-term reliability. Related Motorcycle Audio Categories Cicada Audio Shop Cicada Audio Motorcycle Speakers Motorcycle Amplifiers Amplifier and Power Support Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada Ultra 4-Speaker System FAQ Which motorcycles does this system fit? This system is built for 2014-2023 Harley-Davidson Road Glide Ultra and Street Glide Ultra motorcycles. Does it include hardware for both Road Glide and Street Glide? Yes. Every kit includes both the Road Glide and Street Glide amplifier racks and both grille sets, so you simply use the set that matches your motorcycle. How many speakers are included? Four total Cicada CXX65.2 Pro Coaxial speakers, supplied as two matched pairs. What impedance are the speakers? Each included speaker has a nominal impedance of 2 ohms. How much power does each channel produce? The FLX500.4 produces 125 watts RMS per channel at 2 ohms, matched to the included speakers. Are the speakers bridged? No. Each of the four speakers runs from its own individual amplifier channel. Does this integrate with the factory radio? Yes, through the included HDTSLINKAR T-harness with Maestro AR compatibility on supported models. Is professional installation recommended? Yes. Installation involves amplifier mounting, power wiring, speaker installation, and measured gain setup. Need Help Building the Right Ultra Audio System? Garage Bagger Stereo can help with impedance selection, amplifier matching, mounting, wiring and signal integration for your 2014-2023 Harley-Davidson Ultra. Installation Services Request a Custom Build