WARZONE WZ-E462 4x6" Coaxial Car Speakers

The WARZONE WZ-E462 Elite Series is a pair of 4 x 6 in. full-range coaxial car speakers for replacing worn or limited factory door, dash, front, or rear speakers. Its compact format is intended for vehicles that use a 4 x 6 in. speaker location while combining woofer and tweeter elements in each speaker. This makes it a practical option for refreshing a matched pair of factory speaker positions.With a 450-watt maximum and 225-watt RMS rating per pair, the WZ-E462 is designed for use with compatible factory radios or car audio amplifiers. Its single 4-ohm configuration supports straightforward matching with compatible speaker outputs. The 89 dB sensitivity specification and full-range coaxial layout are intended to support clear everyday listening in a compact installation space.The 4 x 6 in. woofer uses a 1 in. voice coil and 10 oz. ferrite magnet. These components support the speaker's midbass and midrange duties across its stated 85 Hz to 20 kHz frequency response. The result is a full-range speaker format that can reproduce foundational musical information alongside higher-frequency detail.A 1.73 in. PEI dome tweeter is integrated into each speaker to handle upper-frequency reproduction. The tweeter is specified from 1,500 Hz to 20 kHz and works through a 5 kHz crossover point. This coaxial arrangement places the high-frequency driver within the woofer assembly, helping keep installation simple where space is limited.For installation planning, each speaker requires a 3.26 x 5.52 in. cutout and a 1.66 in. mounting depth. Overall speaker dimensions are listed as 4.08 x 6.12 x 2.45 in., so checking the original speaker opening and rear clearance before purchase is important. The package includes two speakers and two protective grilles for a coordinated front or rear speaker upgrade.Key Features 4 x 6 In. Coaxial Design: Combines woofer and tweeter functions in each speaker. 225W RMS Per Pair: Supports use with compatible amplified or factory-radio systems. Single 4-Ohm Impedance: Matches compatible car stereo and amplifier speaker outputs. PEI Dome Tweeter: Handles upper-frequency detail in the integrated coaxial design. 10 Oz. Ferrite Magnet: Supports the woofer's controlled midbass and midrange operation. Protective Grilles Included: Provides two grilles for the included speaker pair. Design & InstallationThe WZ-E462 uses a space-conscious coaxial design with a 4 x 6 in. woofer, integrated 1.73 in. PEI dome tweeter, 1 in. voice coil, and 10 oz. ferrite magnet. Its two-way layout is designed to cover low, mid, and high-frequency content from a single speaker location. The listed frequency response is 85 Hz to 20 kHz, with a 5 kHz crossover point between the woofer and tweeter sections.Confirm that the vehicle has a suitable 4 x 6 in. factory location and verify the 3.26 x 5.52 in. cutout requirement before installation. Also check for at least 1.66 in. of mounting-depth clearance and compare the listed overall dimensions with the available space behind the panel. Use the speakers with a compatible 4-ohm head unit or amplifier, and install one matched pair in an appropriate front, rear, door, or dash location.