SEVP Track Pack

Pre-order (ETA shipment 09/25) SEVP Track Pack Kit Kit Includes: 2 x SEVP 410 x 40mm carbon-silicon carbide front rotors 2 x OEM Tesla Track Pack 6 Piston Caliper (OE#1420625-20-B) 2 x OEM Tesla Track Pack Brake Pad Set (OE#1420626-20-B) 2x OEM Tesla Ceramic Brake Pad kit Front (OE#1759785-00-A) 2 x OEM Tesla Track Pack Front Brake Hose (OE#1420725-00-C & 1420726-00-C) 2x OEM Tesla Dust Shield (OE#1420655-00-B & 1420666-00-B) 4x OEM Tesla Caliper Bolt (OE# 1670954-00-A) 6x OEM Dust Shield Retainer Bolt (OE# 1508733-00-A) ________________________________ Optional Track Pack Firmware unlock (200MPH) by SirHarrold Optional Rear SEVP 365x28mm carbon-silicon carbide front rotors w/ carbotech brake pad *all OE parts are direct source from Tesla For full kit, please visit: SEVP Track Pack Full Kit Direct Bolt-On Tested and Proven: CCB Testing condition: 700C (1296F) 2000 cylces (Pad change in between, on same rotor) 900C (1652F) 75 cycles (No Pad change) (Pad used Pagid RSC2) Silicon Carbide Conversion Molten silicon is infused into the carbon structure, forming silicon carbide (SiC), the ceramic material responsible for the rotor’s hardness and heat resistance. Bedding (Break-In) Procedure ⚠️ Perform only where safe and legal. Sudden braking can be hazardous. Step 1: Gentle Stops 20 stops from 30 mph (50 km/h) to a complete stop using light pedal pressure. Step 2: Medium Stops 20 stops from 75 mph (120 km/h) down to 25 mph (40 km/h) Apply approximately 0.4–0.5 g braking force. Step 3: Heavy Stops 10 stops from 100 mph (160 km/h) down to 25 mph (40 km/h) Apply approximately 0.7 g braking force Target ~4 stops per minute Step 4: Controlled Cool Down Drive at ~50 mph (80 km/h) without braking for 15 minutes Allow brake temperature to drop below 100°C Important Disclaimers Professional installation recommended. Improper installation may result in reduced performance or component damage. Brake pads compatibility is critical. Carbon ceramic rotors must be paired with appropriate pad compounds. Use of incorrect pads may cause excessive wear, noise, or damage. Track use disclaimer: While designed for high-performance applications, extreme track use without proper cooling, pad selection, and maintenance may accelerate wear. Surface appearance: Due to the nature of carbon ceramic composite materials, minor surface variations or cosmetic marks are normal and do not affect performance. Noise & behavior: Occasional noise (squeal) or different pedal feel compared to iron rotors is normal. Warranty disclaimer*: Limited Lifetime Warranty covers manufacturing defects only. It does not cover wear items, improper installation, misuse, track abuse, or damage caused by incompatible components. No liability: User assumes all responsibility for installation and use. SEVP is not liable for damages resulting from improper use, installation, or application. Final Note Proper installation, pad selection, and bedding are essential to ensure optimal performance, longevity, and safety of your braking system.