PRE-ORDER: Bambu Lab R1 55W Desktop CO2 Laser Cutter

PRE-ORDER: Bambu Lab R1 55W Desktop CO2 Laser Cutter NOTE: R1 is currently on Pre-Order only. Estimated to ship around November 06, 2026. 55W CO2 Laser: Cut and engrave wood, clear acrylic, leather, and more, with materials up to 20 mm thick in a single pass. Large Work Area: 600 × 300 mm, or up to 3000 mm long stock with the Conveyor. Auto Laser Alignment: Hands-free optical path calibration in about a minute. No thermal paper, no test shots. TriSense System: Cameras, lasers and XY encoders combined for positioning accuracy within 0.2 mm. Vibration Compensation: Cancels residual shake after a turn for clean, crisp lines. High-Speed Engraving: Up to 1000 mm/s with 20,000 mm/s² acceleration. Class 1 Laser Safety: Fully enclosed beam in normal use, with lid-stop, flame detection and emergency stop. Why Choose Bambu Lab R1 CO2 Laser. Wood to Glass. R1 runs on a 55W CO2 laser, the most versatile laser for everyday materials. Try wood, acrylic, glass, leather, and more. See What R1 can make. PlayDeck – Modular Play Table & Stool Set @janberrydesign Crystal Canyon Mine – Marble Run @Daniel4d Prairie Lamp @Makim Sunflower Painting @miyabi Thundercloud – Layered Acrylic Lamp @Daniel4d Layered Clock @Bambu Lab Bring out the best in every material. Powered by a 55W CO₂ laser, R1 works across a wide range of materials — from wood and acrylic to glass, leather, fabric, and more — each bringing its own character to the piece. Tricky Setup? Solved. Same work area. Smaller footprint. R1 delivers the same working area as a typical CO₂ laser while taking up about a third less space.⁸ E1 Pro Air Purifier. Cleaner air, back in the room. Built for R1, E1 Pro⁶ connects directly to R1's exhaust outlet and pulls smoke out at the source. Multiple filter layers, with activated carbon, catch smoke and fine particles and reduce odors. Go taller. Rounder. Longer. Thicker. Add the setup you need for taller objects, round pieces, thicker stock, and extra-long boards.³ Riser Base Raises R1 to create clearance for taller objects. Also required for the Conveyor and Rotary. Conveyor Automatically feeds long stock through R1, letting you cut and engrave boards up to 3 meters long. Rotary Attachment Rotates round objects for full 360° engraving on bottles, bowls, cups, and more. Requires the Riser Base. Focus lenses (Medium / Long) Greater depth of focus for cleaner cuts through thicker materials — up to 20 mm with the long-focus lens. What's in the box R1 R1 Long Material Bundle R1 Long Material & Rotary Bundle R1 1 1 1 Power Cord 1 1 1 Smoke Ventilation Hose 1 1 1 Smoke Ventilation Fan 1 1 1 Anti-freeze 1 1 1 Funnel 1 1 1 Allen Key 1 1 1 Safety Key (Pre-installed) 1 1 1 Laser Alignment Sensor 1 1 1 Material Pin 1 1 1 Calibration Board 1 1 1 Lubricant Grease 2 2 2 Lubricant Oil 1 1 1 Clear Acrylic 1 1 1 Basswood Plywood 1 1 1 Riser Base - 1 1 Automatic Conveyor Feeder - 1 1 Rotary Attachment - - 1 Rotary Attachment Bracket - - 1 R1 Specs Processing Laser type 55W CO2 laser Supported materials Cut & engrave: wood, acrylic (incl. clear acrylic), leather, fabric, paper, EVA foam, shell Engrave only: coated metal (bare metal cannot be engraved), glass, ceramic Max cutting capacity Short-focus: 15mm black walnut / 20mm acrylic Medium-focus: 18mm black walnut / 20mm acrylic Long-focus: 18mm black walnut / 20mm acrylic (faster than medium at the same thickness)¹ Working area Standalone: 600×300mm With Conveyor: 600×3000mm Max speed 1000mm/s Max acceleration 20000mm/s² Spot size Short-focus: Ø0.11mm Medium-focus: Ø0.17mm Long-focus: Ø0.19mm Absolute motion accuracy (with Vision Encoder) <0.1mm @600mm Air assist pump 30L/min @30kPa Measurement & Positioning Positioning system Dual-camera + dual-laser + dual-encoder system Positioning accuracy <0.2mm Panoramic capture Supported Detail capture Supported Focusing Fully automatic laser ranging Toolhead positioning measure Supported 1. All references to wood refer to plywood. 2. Automatic material recognition is supported for Bambu Lab official materials only. 3. When used with the riser base or the auto-feed accessory, the enclosure is no longer complete and the laser cutter changes from an enclosed Class 1 device to a Class 4 device, requiring CO2 laser-safety eyewear, and is intended for professional use by trained personnel only. 4. Requires the Auto Fire Extinguishing System, sold separately. Download PDF