Starlink Mini & Gen 3 2-in-1 Aluminum Cable Pass-Through Panel - Waterproof RJ45/DC Female Couplers

2-in-1 RJ45 + DC Panel Port Kit Build a cleaner waterproof pass-through point for Starlink Mini or Gen 3. A compact aluminum panel with RJ45 and DC female couplers, designed to route Ethernet and power through RV walls, van panels, boat cabins, battery boxes, camper builds, and off-grid Starlink setups. RJ45 + DC in one panel Mini / Gen 3 options Waterproof rubber plugs Compact aluminum body Clean up the cable entry point, not just the cable. Loose cables through doors, windows, hatches, or unfinished holes can look messy and expose connectors. This panel creates a fixed RJ45 + DC access point for a cleaner Starlink installation. 2-in-1 pass-through Combines one RJ45 Ethernet port and one DC power port in a single compact module. Waterproof port covers Rubber plugs help protect unused ports from rain, dust, and travel debris. Aluminum panel body Made for a more finished look on RV, van, boat, box, wall, or cabin panels. Mini / Gen 3 selection Choose the correct option based on whether your setup is Starlink Mini or Starlink Gen 3. RJ45 and DC access in one sealed module. The front side gives you a protected connection point outside the vehicle, wall, box, or cabin, while the rear side lets your internal cables stay routed more neatly. RJ45 female coupler for Ethernet cable pass-through. DC female coupler for compatible low-voltage power routing. Separate caps help protect each interface when not connected. Ideal for organized RV, van, marine, and off-grid Starlink builds. This is a panel port kit, not a charger, router, cable, or voltage converter. Match your Starlink model, cable, connector, voltage, polarity, and power source before use. Designed for high-performance RJ45 pass-through on Gen 3 setups. The RJ45 side helps create a weather-protected Ethernet entry point for Starlink Standard Gen 3 installations, especially when the outdoor dish and indoor router or power area need to be separated. Ethernet extension point Create a fixed RJ45 port instead of pulling a cable through an open gap. Cleaner indoor routing Keep the router or power area inside while the dish cable runs outside. IP68-style protection Product media positions the panel for weatherproof and dustproof outdoor use. For heavy-use installs Useful for cabins, RVs, rural homes, work sites, and long outdoor cable routes. A practical DC companion for Starlink Mini off-grid power. The DC side is designed for compatible low-voltage power layouts, helping you route power from a vehicle, battery box, power station, RV system, or portable power kit into a cleaner panel interface. DC 5.5×2.1mm-style power port shown in product media. Works as a fixed entry point for compatible 12V–48V DC power layouts. Useful when the power source stays inside and Starlink Mini sits outside. The panel does not change voltage. Use a compatible Starlink Mini or Gen 3 power source and confirm polarity before powering any device. Metal body, gasket sealing, and rubber plug protection. The exploded product image shows a structured assembly built for a cleaner long-term installation, including a fixed panel, metal main body, silicone ring, gasket, screw nut, screws, and port covers. Metal fixed panel Creates a cleaner exterior mounting face for RVs, vans, boats, walls, and boxes. Silicone sealing ring Helps seal the panel body when installed correctly on a suitable surface. Rubber port plugs Protect the RJ45 and DC ports when a cable is not connected. Stainless screws Four visible screws support a more secure panel-mounted finish. Small size, big cable-management value. The panel is compact enough for tight vehicle and enclosure builds while still giving you two useful pass-through ports. Product type 2-in-1 RJ45 + DC cable pass-through panel Model options Starlink Mini / Starlink Gen 3 Front panel size shown Approx. 64mm × 64mm / 2.51in × 2.51in Body depth shown Approx. 66mm / 2.59in Port style RJ45 female coupler + DC female coupler Best use RV, van, boat, battery box, cabin, camper, wall, and outdoor Starlink cable entry All-weather durability for exposed travel builds. Outdoor panels can face rain, road dust, snow, desert heat, marine air, and campsite debris. This kit is designed to give your cable entry point a more durable, covered exterior interface. Rain & splash defense Rubber caps and gasket details help protect the panel interface during outdoor use. Dust protection Good for campsites, dirt roads, farms, deserts, and field-work builds. Cold-weather use Useful for snow-season RVs, cabins, mountain routes, and winter backup setups. Cleaner long-term install More finished than repeatedly passing loose cables through windows or open doors. Waterproof hardware still requires careful installation. Do not leave powered connectors submerged, strained, or exposed to standing water. Built for RV, marine, motorcycle, cabin, and field setups. Use the panel wherever a cleaner exterior connection point helps your Starlink Mini or Gen 3 setup stay organized. RV & van life Create a fixed exterior port so cables can route into the interior more cleanly. Marine & boat use Add a covered RJ45/DC pass-through point for cabin, console, or enclosure routing. Cabin & remote home Separate outdoor cable entry from indoor router or power equipment placement. Field work kits Use on mobile boxes, work trailers, off-grid stations, and temporary internet setups. Simple installation workflow. Plan the port location first, then install the panel as a fixed cable entry point for your Starlink route. Choose the panel location Pick a flat, strong surface with room for the rear body, cables, gasket, and nut. Cut and mount carefully Prepare the opening, seat the gasket, insert the body, and tighten the rear nut securely. Connect RJ45 and DC Use compatible cables and verify connector fit, voltage, current, and polarity before powering. Seal unused ports Close the rubber plugs when ports are not connected, and keep the cable route strain-free. This panel requires an installation opening. Measure twice before cutting any RV wall, vehicle panel, boat console, box, or cabinet surface. Select the right option for your Starlink system. The product page offers Starlink Mini and Gen 3 options. Choose based on your actual device and cable layout. Best for Starlink Mini and Gen 3 cable pass-through builds RV, van, boat, camper, cabin, battery box, and mobile work setups Users who want one panel for RJ45 and DC access Cleaner indoor-to-outdoor cable routing Check first Select the correct Mini or Gen 3 option Confirm RJ45 cable type and DC connector size Confirm voltage, current, and polarity before use Do not install where water pools or cables are pulled tight Build a cleaner Starlink cable and power route Pair this panel with the right Ethernet extension, Mini vehicle power, and flat DC routing cable for a more complete install. RJ45 extension Starlink V3/V4 & Mini Waterproof Cat6 Cable Add 10M / 32.8FT routing distance when the dish position and panel entry point are not close together. View Cat6 cable → Mini vehicle power Starlink Mini 12V/24V Car Charger with USB-C Use a compatible car, RV, van, or truck socket as the power source for Mini vehicle setups. View car charger → DC pass-through route Starlink Mini IP67 Waterproof Flat DC Cable Route DC power through suitable doors, windows, hatches, and tight seams with a lower-profile cable. View flat DC cable → Starlink Mini & Gen 3 RJ45/DC Panel Port FAQ Quick answers for RV, van, boat, camper, cabin, off-grid, marine, and field-work Starlink setups. What does this 2-in-1 panel do? It creates a fixed pass-through point for RJ45 Ethernet and DC power, helping route Starlink cables through RV walls, van panels, boat cabins, battery boxes, cabins, and outdoor enclosures more cleanly. Is it compatible with Starlink Mini and Gen 3? The product page provides Starlink Mini and Gen 3 options. Choose the option that matches your actual Starlink model and cable setup. Does this panel convert voltage? No. This is a pass-through coupler panel. It does not step up, step down, regulate, or create power. Use a compatible power source and confirm voltage, current, polarity, and connector size before use. What ports are included? The product is designed with one RJ45 female coupler and one DC female coupler in the same panel, with waterproof rubber plugs for port protection when not connected. Is it waterproof? The product media highlights IP68 weatherproof and dustproof positioning. Correct installation, gasket seating, cable strain relief, and safe connector protection are still required. Do I need to drill or cut a hole? Yes. This is a panel-mounted pass-through kit, so the surface needs a suitable opening and enough rear clearance for the threaded body, gasket, nut, and cables. Where is this panel most useful? It is useful for RVs, vans, campers, boats, cabins, work trailers, battery boxes, outdoor power stations, mobile offices, and remote internet setups where Starlink cables need a cleaner entry point. Can I use it with a 12V–48V DC power system? The product media positions the DC side for compatible 12V–48V DC power stations or vehicle electrical systems. Always confirm your exact Starlink power requirement, polarity, and adapter compatibility before connecting. Can the RJ45 port be used for Gen 3 Ethernet routing? Yes, the RJ45 side is designed for a clean Ethernet pass-through route. Use the correct Starlink-compatible cable and protect the cable from water pooling, sharp bends, and physical strain. What accessories pair well with this panel? A waterproof Cat6 cable extends the RJ45 route, a Starlink Mini 12V/24V car charger supports vehicle power, and a waterproof flat DC cable helps route power through doors, windows, hatches, or tight seams. Does this include Starlink Mini, Gen 3, cables, or a charger? No. This product is the RJ45/DC pass-through panel kit only. Starlink hardware, cables, chargers, power banks, mounts, and other accessories are sold separately unless a selected bundle clearly states otherwise. Is this an official Starlink product? No. This is a CTmods accessory designed for compatible Starlink Mini and Gen 3 cable pass-through installations.