Whiter than white Trim Paint

Right up your street when you’re after a bish-bash-bosh, straight forward approach. A thumping great, clean and bright white. Soft-satin sheen For interior woodwork, radiators and furniture Self-priming formula High scuff resistance UKCA and EN71-3 certification Water based with low VOCs General Water based Suitable for interior use only Chalk and mineral paint formulated for trims, skirting, doors etc. Also suitable for other interior woodwork, powder coated radiators, and all sorts of furniture including laminate UKCA and EN71-3 certified (safe for use on children’s toys) EN71-3:2019+A1:2021 Ingredients: Chalk, Clay, Titanium Dioxide, Resin, Talcum, Preservative Low VOC content and low odour Finish – soft satin sheen Self-sealing - does not require a top coat Self-priming – no primer or undercoat required for any surface except bare metal (in which case use a suitable metal primer) Coverage A 500ml tin will provide a coat of up to 7m2. For a durable finish, a minimum of 2 coats is required, so your 500ml tin should provide full coverage for 3.5m2 on non-porous surfaces like laminate or metal. Porous, or ‘thirsty’, surfaces like bare wood or MDF, tend to absorb paint meaning additional coats are likely to be required to achieve a durable finish. In this case, your 500ml tin will provide less than 3.5m2 of full coverage. If you apply the paint too thinly, durability may be affected. Preparation Ensure surfaces are in suitable condition for painting - clean, dry, free from wax, grease or penetrating substances and in sound condition. If previously painted, remove loose or flaking paint. Surface preparation required in addition to the above clean with Frenchic Sugar Soap, rinse and dry thoroughly. Hand-sand sufficiently to abrade the surface. Wipe off any dust, paint away! Take care on opening the tin lid – a Frenchic tin opener is recommended Stir thoroughly with a wide implement, such as a paint paddle, prior to each use Application, drying and curing (hardening) Apply with a good quality brush or roller To allow self-levelling, avoid overworking the paint Allow a minimum of 4 hours between coats (even if the paint feels touch dry) Curing (hardening) time is up to 3 weeks in normal conditions. Treat gently until curing is complete Clean up and storage Reseal tin after use. Clean up any spills immediately with water. Wash brushes in warm, soapy water. Do not store where the tin could be subjected to damp, frost, freezing or high temperatures.