Commodore Amiga 2000 GVP 68040 Desktop Computer ZuluSCSI RGBtoHDMI - CA1070507

NTSC Commodore Amiga 2000 Desktop Computer with DKB 2MB MegAChip CHIP RAM, 8373R4PD ECS Super Denise, GVP 68040@33mhz CPU/FPU Accelerator Populated with 32mb GVP Compatible 60ns RAM, 16gb ZuluSCSI Harddrive, 40X SCSI CDROM Drive RGBtoHDMI LCD/LED HDMI Scandoubler/FlickerFixer 17" 4:3 DELL E176FPf Color LCD Monitor Specs: Commodore Amiga Motherboard rev.6.2 with ECS Chipset v3.1 Kickstart ROM, DKB 2MB MegAChip CHIP RAM, 8373R4PD ECS Super Denise GVP 68040@33mhz CPU/FPU Accelerator Expanded to 32mb of GVP Compatible 60ns RAM SIMMs (Expandable to 64mbs) Lastest Eprom v4.15, ZuluSCSI with 16gb SD SCSI Harddrive with custom 3D Printed bracket to allow for External Accessibility NOT Hot-Plugable make sure computer is off before inserting/removing SD Card DVD-305S 40X Internal Slot Load SCSI CDROM Drive Painted to match original front faceplate New working coin cell battery and holder installed. Installed onto the inner case front to be away from the motherboard and allow easy access for replacing the battery when needed. 880kb Internal Floppy Disk Drive (Chinon FB-354) Heads cleaned, gear & rails lubricated, runs great and quiet Genuine Commodore Amiga 2000 200watt Clean power supply RGBtoHDMI Scandoubler/FlickerFixer pixel-perfect HDMI output to any modern LCD/LED Monitor. with custom made bracket for rear external access. Onboard 23pin RGB Video for 15khz Monitors works as well. Both can be used at the same time or independent of each other. The video display is mirrored between the two devices if used at the same time. Commodore Amiga 2000 Keyboard Commodore 2 Button Tank Mouse and Black Mouse Pad 17" 4:3 DELL E176FPf Color LCD Monitor HDMI to VGA Cable, VGA Cable, Power Cords and NEW 6' Stereo Audio cable Manuals Included: copy of GVP Accelerator Manual Original AmigaOS v3.1 Manuals - Workbench, AmigaDOS and ARexx Can read about the RGBtoHDMI here: https://github.com/c0pperdragon/Amiga-Digital-Video Software Disks Included: copy of GVP Accelerator Install Disk copy of Amiga OS v3.1 Install, Workbench, Extras, Fonts, Storage, Locale copy of AsimCDFS v3.10 CDROM Software Install Disk copy of Magic WB The Workbench Enhancer Install Disk CD Included: Aminet 7 - August 1995 CD in Jewel Case to get you started Some info about the ZuluSCSI adaptor configuration: I currently have it setup as 4 Harddrives. ID0 to ID3 (2 Partitions on ID0 and the others are 1 Partition each), CDROM is ID4. ID0 is 2.0GB (AmigaOS) and 750mb (BACKUPS) Partitions, ID1 is 4GB (Work_4gb1), ID2 is 4GB (Work_4gb2) and ID3 is 4GB (Work_4gb3). Its currently set to bootup into Amiga OS 3.1. The adaptor is also setup with termination turned off (so power is not required to the adaptor). I've installed it into a 3D printed bracket that is installed into one of the back expansion slots. QUIET, COOL and FAST!!! Monitor has 3 light hot spots in center of screen, has a scratch on the top of faceplate and small scratch/smoothness on the middle top of the keyboard, not really noticeable unless you look at it in the light sideways, Keyboard and Mouse cables could use some more cleaning to be perfect, Has some small nicks, scratches and some yellowing here and there, mainly the Keyboard case and space bar are slightly yellowed, otherwise, All is Tested in Excellent Clean Working Condition and Guaranteed Against DOA! as pictured. Shipping Includes Insurance and Signature Required. Will package well for safe shipping. Please be sure to open the computer and make sure all cards are seated properly upon arrival. Sometimes they can get loose in the shipping process.