JideTech LC012 15km Forest Fire Detection Thermal PTZ Camera | 640×512 Thermal + 4MP 52X Zoom Visible Camera

Long-Range Forest Fire Detection Thermal PTZ Camera JideTech LC012 15km Forest Fire Detection Thermal PTZ Camera The JideTech LC012-52X-4MP-TH is a heavy-duty dual-spectrum thermal PTZ camera designed for forest fire detection, wildfire early warning, thermal hotspot detection, and unattended wide-area monitoring. It combines a 640×512 thermal imaging sensor, a 4MP visible-light camera, and 52X optical zoom to help operators detect fire sources, verify field conditions, and respond faster. With up to 15.6km fire-source detection for a 2m × 2m fire target, automatic cruise scanning, thermal-source tracking, smoke recognition, over-temperature alarm, and IP66 outdoor protection, LC012 is built for project-based deployment in forests, power-line corridors, mining areas, petrochemical plants, border zones, coastal areas, airports, and other large outdoor sites. Up to 15.6km Fire-Source Detection 640×512 Thermal Imaging 4MP Visible Camera 52X Optical Zoom Smoke Recognition IP66 Outdoor Housing Built for Forest Fire Early Warning and Wildfire Prevention Projects Forest fires often begin as small heat sources that are difficult to identify with conventional visible-light cameras. The LC012 uses thermal imaging and intelligent hotspot detection to locate abnormal heat sources in forests, mountains, plantations, remote industrial sites, and wide outdoor areas. This long-range thermal PTZ camera supports 24/7 monitoring and does not depend on visible light. It helps forestry departments, system integrators, government agencies, and industrial safety teams monitor large areas where manual inspection is slow, expensive, or unsafe. Quick Answer: What Is the LC012 Used For? The JideTech LC012 is a 15km-class long-range forest fire detection thermal PTZ camera used for wildfire early warning, thermal hotspot detection, smoke recognition, over-temperature alarm, perimeter protection, and unattended wide-area monitoring. It integrates 640×512 thermal imaging, 4MP visible-light video, 52X optical zoom, automatic cruise scanning, thermal-source tracking, and IP66 outdoor protection. Key Advantages of the LC012 Forest Fire Detection Camera Up to 15.6km Fire-Source Detection Detects a 2m × 2m fire source from up to 15.6km away, helping monitoring centers identify fire risks earlier. 640×512 Thermal Imaging High-resolution thermal imaging helps locate abnormal heat sources in forests, mountains, industrial areas, and wide outdoor sites. 4MP Visible Camera with 52X Optical Zoom The visible-light channel provides long-range scene verification after thermal detection, improving operator confidence. Dual-Spectrum Monitoring Thermal imaging detects heat anomalies, while visible-light video allows operators to confirm smoke, flames, terrain, and field details. Automatic Cruise Scanning Supports 8 cruise routes, with up to 256 preset positions per route, for unattended patrol monitoring across large areas. Intelligent Alarm Filtering Dynamic and static masking help reduce false alarms caused by irrelevant heat sources and environmental interference. Thermal-Source Tracking Supports multi-target thermal-source detection, heat-source tracking, and temperature display for faster event assessment. Smoke Recognition and Over-Temperature Alarm Identifies smoke and abnormal temperature events, with configurable thresholds for alarm triggering. Heavy-Duty IP66 Outdoor Design Aluminum alloy housing, IP66 protection, and -20°C to +60°C operating temperature for demanding outdoor projects. SEO Focus: 15km Forest Fire Detection Thermal Camera for Global Wildfire Projects The LC012 is designed for long-range forest fire detection, wildfire detection, wildfire early warning, thermal hotspot detection, smoke recognition, and unattended forest monitoring. It is suitable for project scenarios in regions such as Australia, North America, Europe, South America, the Middle East, Southeast Asia, and Africa. It can be used for Australia bushfire monitoring, North America wildfire detection, European forest fire prevention, mountain fire monitoring, national park surveillance, plantation protection, power-line corridor protection, mining area safety, and industrial thermal security projects. Australia Bushfire Monitoring North America Wildfire Detection European Forest Fire Prevention Mountain Fire Monitoring National Park Surveillance Power-Line Corridor Monitoring Mining Area Thermal Safety Industrial Hotspot Detection Intelligent Hotspot Detection LC012 supports intelligent thermal-source target recognition and detection. It can automatically identify fire sources, over-temperature events, smoke, intrusions, and other abnormal situations, helping reduce the need for continuous manual video watching. Multi-target thermal-source detection Fire early warning Smoke recognition Over-temperature alarm Thermal-source tracking Intelligent masking to reduce false alarms Unattended Wide-Area Monitoring The PTZ system supports preset-position scanning and angle scanning, making it suitable for large forest areas, remote border zones, industrial facilities, and outdoor safety monitoring projects. 0°–360° horizontal rotation -45° to +45° vertical rotation 8 cruise routes Up to 256 preset positions per route Area intrusion and line-crossing detection Historical event traceability for review Recommended Application Scenarios LC012 is suitable for projects that require long-distance thermal detection, unattended monitoring, fast alarm response, and visual verification. Forests Nature Reserves Petrochemical Plants Mining Areas Power Plants Transmission Lines Border Defense Coastal Defense Airports Industrial Parks Remote Areas Wide-Area Security Technical Specifications Item Specification Product Model LC012-52X-4MP-TH Thermal Detector Vanadium oxide uncooled infrared focal plane detector Thermal Resolution 640 × 512 Pixel Pitch 12μm Spectral Band 8–14μm NETD ≤50mK @25°C, F#1.0 Thermal Focal Length 30–150mm Thermal Field of View 14.7° × 11.7° to 2.9° × 2.3° Fire Detection Distance Up to 15.6km for 2m × 2m fire source Vehicle / Vessel Detection Distance Up to 6km Personnel Detection Distance Up to 1,800m Vehicle / Vessel Recognition Distance Up to 3,500m Personnel Recognition Distance Up to 1,500m Thermal Palette White hot, black hot, iron red, lava, rainbow, iron gray, red hot, blue-red Visible Sensor 1/1.8” high-performance CMOS Visible Resolution 4MP, 2560 × 1440 Visible Focal Length 15–775mm Optical Zoom 52X Minimum Illumination Color: 0.0005 Lux @F1.4, AGC ON; B/W: 0.0001 Lux @F1.4, AGC ON Focus Mode Manual / Semi-automatic Pan Range 0°–360° Pan Speed 0.01°–30°/s, adjustable Tilt Range -45° to +45° Tilt Speed 0.01°–15°/s, adjustable Cruise Presets 8 cruise routes; each route supports up to 256 preset positions Temperature Measurement Range -20°C to +550°C Temperature Measurement Accuracy ±2°C or ±2% of reading, whichever is greater System Functions Multi-target thermal-source detection, over-temperature alarm, fire early warning, smoke recognition, thermal-source tracking, intelligent masking, perimeter protection, cruise scanning Perimeter Detection Area intrusion detection, line-crossing detection, region entry detection, region exit detection Network Protocols IPv4, TCP/IP, UDP, HTTP, DHCP, RTP/RTCP/RTSP, FTP, NTP, IGMP, ICMP Video Compression H.265 / H.264 / MJPEG Interfaces 1 × RJ45 Ethernet port, 1 × RS485 interface Alarm Output SDK alarm output supported Operating Temperature -20°C to +60°C Humidity 5%–95%, non-condensing Protection Rating IP66 Power Supply AC 24V Power Consumption ≤120W Housing Material Aluminum alloy Device Dimensions 540mm × 334mm × 619.5mm Weight ≤38kg Note: Detection performance may vary depending on target size, installation height, weather, visibility, terrain, and system configuration. FAQ: Forest Fire Detection Thermal PTZ Camera What is the detection distance of the JideTech LC012 forest fire detection camera? The LC012 can detect a 2m × 2m fire source at up to 15.6km, making it suitable for long-range forest fire prevention and wildfire early warning projects. Can the LC012 be used for forest fire detection projects in Australia, North America and Europe? Yes. The LC012 is technically suitable for wildfire detection and forest fire prevention projects in Australia, North America, Europe, and other regions requiring long-range thermal monitoring. For government tenders or regulated projects, local certification, integration requirements, and project compliance documents should be confirmed before deployment. Is this camera only for forest fire detection? No. It can also be used for perimeter protection, power-line corridor monitoring, mining area safety, petrochemical plant monitoring, border defense, coastal defense, airports, and other wide-area security projects. Does the LC012 support visible-light verification? Yes. LC012 combines 640×512 thermal imaging with a 4MP visible-light camera and 52X optical zoom, allowing operators to detect heat sources and visually verify events. Can the camera support unattended monitoring? Yes. The system supports automatic cruise scanning, multi-target thermal-source detection, over-temperature alarm, smoke recognition, thermal-source tracking, and intelligent masking to reduce false alarms. Is the LC012 suitable for outdoor deployment? Yes. The camera has IP66 protection, aluminum alloy housing, and an operating temperature range from -20°C to +60°C. Designed for Project-Based Deployment The LC012 is suitable for system integrators, forestry departments, government projects, energy infrastructure operators, industrial sites, border and coastal security projects, and wide-area safety monitoring systems. JideTech can provide product specifications, integration support, and solution recommendations based on actual site distance, installation height, monitoring angle, network environment, command center requirements, and alarm linkage requirements. Need a Long-Range Forest Fire Detection Solution? Contact JideTech to get the LC012 datasheet, project quotation, and recommended deployment solution for your forest fire prevention, wildfire detection, or wide-area thermal monitoring project. Request a Project Quote