eco3spa Step 1 - Hot Tub Cleaner

eco3spa Step 1 – Hot Tub Cleaner Keep your hot tub fresh, clean and naturally hygienic with eco3spa Step 1 – Hot Tub Cleaner. Specially formulated to remove hidden biofilm, grease, body oils and organic build-up from pipework, jets and internal surfaces, this powerful yet environmentally friendly hot tub cleaner helps prepare your tub for clean, crystal-clear water. Unlike harsh chemical flushes, eco3spa Step 1 is biodegradable and safe for the environment, making it ideal for eco-conscious hot tub owners and traditional wood fired hot tubs where a more natural water care approach is preferred. Why Wood Fired Hot Tubs Need Cleaning Even if your wood fired hot tub looks clean, bacteria, biofilm and organic residue can build up over time, especially after draining, periods of non-use, or water changes. Brand-new hot tubs may also contain residues left behind from factory wet testing. Regular cleaning helps: Remove hidden biofilm and organic contamination Eliminate grease, body fats and scum build-up Improve water quality and clarity Reduce unpleasant odours Support natural hot tub water care Keep wood fired tubs hygienic between refills Suitable for: Wood fired hot tubs Electric hot tubs Traditional spas Outdoor wellness tubs Eco-conscious spa maintenance Each bottle treats up to 2,000 litres of hot tub water How to Use in a Wood Fired Hot Tub eco3spa Step 1 can be used as a simple and effective cleaner for wood fired hot tubs without circulation systems or jets. Empty your wood fired hot tub completely. Add a small amount of eco3spa Step 1 cleaner to a bucket or mop bucket filled with warm water. Using a soft cloth, sponge or mop, thoroughly clean all internal surfaces of the tub. Pay particular attention to water lines, seating areas and corners where grease and residue can build up. Rinse the tub thoroughly using clean water or a hose. Allow the tub to drain fully before refilling with fresh water. Between Uses eco3spa Step 1 can also be diluted and used to wipe around the edges and waterline of your wood fired hot tub between uses to help prevent scum build-up and maintain a clean finish. How to Use in Hot Tubs with Jets & Pipework Ensure the hot tub is filled with water to approximately 50mm above all jets and air vents. Open all air inlet valves and centre any diverter valves. Remove headrests and filters from the tub. Pour the eco3spa Step 1 cleaner into the water, reserving a small amount to clean the shell and headrests afterwards. Run all pumps, jets and air blowers for at least 60 minutes. Foaming and dark particles are normal as biofilm and contaminants are removed from the system. Leave the water to stand for 30 minutes. Run the pumps and jets again for a further 30 minutes. Drain the hot tub completely. The discharged water is environmentally safe and can be emptied onto grass or plants. As the water drains, wipe away any residue from the shell using a soft cloth and fresh water. Use the reserved cleaner sparingly for stubborn marks or scum lines. Rinse all surfaces thoroughly to prevent foaming after refilling. Refill the hot tub with clean water and replace cleaned filters and headrests. Eco-Friendly Hot Tub Cleaning for all Hot Tubs eco3spa Step 1 is the ideal solution for maintaining a clean, healthy and natural wood fired hot tub without relying on aggressive chemicals. Regular use helps protect your spa, improve bathing comfort and extend the life of your hot tub system.