KeyDiy KD-MP Tool for MLB/MQB Systems

The KEYDIY KD-MP is a specialized, professional automotive locksmith tool designed to read and collect anti-theft data from MQB48 and MLB systems, primarily used in Audi, Porsche, Lamborghini, Bentley, and Volkswagen (VAG) vehicles. It works by extracting data directly from the original key (often without traditional soldering) and uses cloud technology to calculate security data, enabling the addition of new keys. Key Features and Capabilities: System Support: Specifically targets VAG MLB and MQB48 immobilizer systems. No Soldering Necessary: Uses a soldering-free clip to connect to the key's PCB, though it does require the removal of specific small capacitors (e.g., 1.8PF) during the process. Key Functions: Performs key identification, data calculation, dealer key generation, and key restoration. Data Collection: Uses KD PC software to collect original key data, which is then saved to the cloud. Supported Keys: Works with OEM, aftermarket, and KD key remotes. Requirement: Requires KD-MP activation (15 USD) and additional costs for MLB/MQB48 function activation and data calculation fees 1. Data Collection Process (Soldering-Free) Hardware Setup: The KD-MP connects via USB to a computer running the dedicated KD software. Wiring/Clipping: The user opens the original key, and either solders a specialized harness or uses a specialized "solder-free clip" (for certain MLB/MQB keys) to connect the key's circuit board (PCB) to the KD-MP. Key Identification & Reading: The software identifies the key type and allows the operator to collect the raw data. This often involves placing the PCB inside the KD-MP's induction area, ensuring it sits properly for reading. Capacitor Management: For certain keys, a 1.8PF capacitor must be removed or handled to unlock the data. 2. Cloud-Based Calculation Once raw data is collected, the KD-MP sends it to the Keydiy cloud server via the PC software. The system calculates the required immobilizer (IMMO) data (CS code), which usually takes several minutes. The computed data is stored in the cloud, allowing it to be accessed for creating a dealer key. 3. Key Generation and Programming Dealer Key Generation: The calculated data is used to produce a "dealer key" (a new blank key configured to the specific car). For MLB systems, the KD-MP can directly generate a dealer key. For MQB48 systems, the data must typically be used with the KEYDIY KD-X4 programmer to generate the dealer key. Key Learning (Programming): Finally, the dealer key is programmed into the car, typically using an OBD2 connection to the car's IMMO system (often facilitated by the KD-X4 or other diagnostic tools). Key Details & Requirements Cost: The operation is not free; it typically requires 200 KD coins per reading, and activating the function requires a one-time license fee (around 2500 KD coins) Compatibility: It is specifically for MQB48 (such as 5C) and MLB platforms. Required Tools: KD-MP is primarily a reader/collector. To complete the entire key-adding process (specifically for MQB48), you usually need both the KD-MP (reader) and the KD-X4 (generator/programmer).