Katool 11,000 lb 4-Post Alignment Lift. Rolling Jack Included | KT-4M110PA

Take on More Alignment Work with the Katool KT-4M110PA 11,000 lb Four Post Alignment Lift If your shop runs alignment work on full-size cars and light trucks, a budget two-post or undersized four-post turns into a constant compromise. You're working around a lift that wasn't built for alignment, juggling drip trays and floor jacks, and sending heavier vehicles down the road because the rated capacity isn't there. Lifts that can't carry an 11,000 lb load or that skip a real rolling jack cost you the inspection and suspension jobs that should be driving your ticket up. The Katool KT-4M110PA solves it with an 11,000 lb lifting capacity, 84.5" maximum lift height, and an included 7,000 lb rolling jack for wheel and suspension service. Reinforced heavy-duty steel runways deliver the stability alignment work demands, and the pneumatic lock release system drops every position with one handle rather than asking the technician to walk around the lift. The 220V power requirement runs on shop-grade single-phase service, and the carriage reaches full height in roughly 50 seconds. Buy it once and the KT-4M110PA earns its keep across alignment, inspection, brake, and suspension work without dragging in a separate set of jacks for every job. The package ships with the rolling jack, three drip trays, one lift tray, and aluminum approach ramps, so nothing extra has to be sourced before installation. One tech can handle the full alignment workflow without help on the floor, and the reinforced runway construction keeps the rails true under load, which is what makes alignment readings repeatable over the life of the lift. Ready to add a true alignment-grade lift to your shop? Talk to a Pitstop Pro lift specialist for installation requirements and shipping options on the KT-4M110PA. Benefits of the Katool KT-4M110PA True 11,000 lb capacity for full-size vehicles Eleven thousand pounds covers full-size pickups, SUVs, and vans. Reinforced heavy-duty steel runways carry the load without the flex that throws off alignment readings. Includes 7,000 lb rolling jack Wheel and suspension service happens on the same lift, not in a second bay. The 7,000 lb rolling jack handles axle work on every full-size vehicle the lift accepts. Pneumatic single-point lock release One handle drops both columns with the pneumatic unlock. No walking back and forth between sides to release each lock individually, and no fighting a stiff manual handle at the end of a long day. Fast 50-second lift cycle Full carriage travel in roughly fifty seconds means less idle time per repair order. Across a busy week that recovers thirty-plus minutes of billable shop time. Heavy-duty alignment-grade runways Reinforced steel construction holds rail alignment under load. That rail integrity is what keeps alignment readings consistent year after year. Complete package, ready to install Ships with the rolling jack, three drip trays, one lift tray, and aluminum approach ramps. Nothing extra to source before the installer can finish the job. Key Features of the Katool KT-4M110PA 11k Alignment Lift • 11,000 lb lifting capacity: Engineered for cars, trucks, SUVs, and other heavy vehicles. The reinforced runway construction provides the stability and strength alignment work demands across the full rated load. • 84.5 inch maximum lift height: Generous under-vehicle clearance lets technicians work comfortably while standing. The 84.5 inch height supports inspection, repair, detailing, and alignment work without forcing a hunched posture across a long job. • Includes 7,000 lb rolling jack: The package ships with a 7,000 lb rolling jack along with three drip trays and one lift tray. Wheel and suspension service happens on the same lift without breaking down the setup or rolling in a second piece of equipment. • Pneumatic lock release system: Pneumatic unlocking smooths operation and shortens the lock-release cycle compared to manual systems. The technician releases both columns from one position, keeping the workflow steady through a busy bay. • Reinforced heavy-duty steel runways: Runways are built from reinforced heavy-duty steel for the load and travel an alignment lift sees over the long term. Rail integrity is what keeps alignment readings repeatable from one job to the next. • 220V power and aluminum ramps included: Operates on standard 220V power, which matches the service most shops already have. Lightweight aluminum approach ramps are included for daily operation and easy roll-on, roll-off positioning. Minimum Garage Requirements ✔ Floor Space: 240.7" L x 126" W (20'-0" x 10'-6") ✔ Concrete Thickness: Minimum 4" (102 mm) ✔ Concrete Strength: Minimum 3,000 PSI compressive ✔ Electrical: 220V single-phase, dedicated circuit ✔ Lift Time: Approximately 50 seconds full travel ✔ Approach Ramps: Aluminum, included with lift ✔ Floor Space: 240.7" L x 126" W (20'-0" x 10'-6") ✔ Concrete Thickness: Minimum 4" (102 mm) ✔ Concrete Strength: Minimum 3,000 PSI compressive ✔ Electrical: 220V single-phase, dedicated circuit ✔ Lift Time: Approximately 50 seconds full travel ✔ Approach Ramps: Aluminum, included with lift *This lift must be installed on a concrete surface meeting the manufacturer's minimum requirements. Installing on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation. Katool KT-4M110PA 11,000 lb 4-Post Alignment Lift Specifications Manufacturer Katool Model KT-4M110PA Lift Type 4-Post Alignment Lift Lifting Capacity 11,000 lbs Rolling Jack Capacity 7,000 lbs Maximum Lift Height 84.5" Max. Underneath Clearance (fully raised) 77" Lift Time Approximately 50 seconds Lock Release System Pneumatic unlocking Power Requirement 220V Runway Construction Reinforced heavy-duty steel runways Approach Ramps Aluminum, included Overall Length (with ramps) 240.7" (about 20'-0") Lift Length (post-to-post) 196.7" Overall Width 126" (10'-6") Runway Length 181.9" Runway Width (each) 18.9" Distance Between Runways 37.4" Lowered Height 7.8" Included Accessories 7,000 lb rolling jack, 3 drip trays, 1 lift tray, aluminum approach ramps Warranty 1 Year limited parts & defects | 3 Year structural Ready to upgrade your garage? Talk to a Lift Specialist or explore more options. Call (470) 208-2754 Request a Quote Browse All Lifts