Outdoor Soundproof & Water Proof - Air conditional - KK1479

KK1479 — Outdoor Soundproof & Waterproof AC Panel Block the noise. Shield the unit. In about 10 minutes. Most AC noise fixes are half-measures. A tarp blocks rain but traps heat and does nothing for sound. A foam wrap dampens noise but falls apart the first time it rains. You end up choosing between a quiet unit and a dry one. The KK1479 fixes that with a reversible two-face panel — weatherproof on the outside, sound-absorbing on the inside — that mounts flat to any fence or frame around your outdoor AC or heat pump unit. Heads up: This listing is for individual panels. Most units need 3–4 panels to fully enclose a standard condenser. Pick the 5-piece pack if you're wrapping a full unit; the 1-piece option is for patching a single side or extending an existing wall. How the two-face panel works 1. Face it the right way The panel has two different sides. The smooth, glossy face goes outward, toward the weather. The quilted, padded face goes inward, toward the unit. 2. Lock panels together Two hook-and-loop (velcro) strips — one along the top edge, one along a side edge — let neighboring panels lock edge-to-edge with no gap, building a continuous wall to whatever length you need. 3. Secure to the frame Reinforced grommets at all four corners let you cable-tie or wire the joined panels to a chain-link fence, wood frame, or enclosure — holding the wall in place through wind and storms. 4. Remove anytime Cut the ties and unhook the velcro to pull panels down for AC maintenance, then put them back in seconds. Works on chain-link fencing, wood frames, and most welded enclosures. No drilling into the AC unit itself required. What it does Weatherproof outer face. Coated, UV-stabilized fabric on the outside sheds rain and resists sun damage — the face that's actually exposed to the elements year-round. Sound-absorbing inner face. A quilted, padded inner layer faces the compressor and fan to absorb mid- and high-frequency mechanical noise before it reaches your yard or your neighbor's. Built to stay put. Dual hook-and-loop seams plus corner grommets keep panels locked together and anchored, even in wind. Honest note: No fabric panel eliminates AC noise entirely — you're reducing it, not silencing it. Panels work best as a full enclosure on 3+ sides with clearance maintained per your unit's manufacturer guidelines. For maximum reduction, pair with a solid-surface backing (fence or wall) rather than open air. Specs Material Weatherproof coated outer face + quilted padded inner face Joining Dual hook-and-loop seams (top edge + side edge) Mounting Reinforced corner grommets, cable-tie or wire (not included) Colors Black, Blue, Gray Sizes 50 x 50 cm (19.6 x 19.6 in) / 100 x 100 cm (39 x 39 in) Care Wipe clean, air dry Pack 1 piece or 5-piece pack Size guide Measure the sides of your AC unit's fence or frame, then add a few cm of overlap per panel so the velcro seams have full contact. Size Best for 50 x 50 cm (19.6 x 19.6 in) Small window units, compact heat pumps, patching a single gap 100 x 100 cm (39 x 39 in) Standard residential condensers, full fence-height coverage What's in the box • Panel(s) in your chosen size, color, and pack quantity • Reinforced grommets at all 4 corners (pre-installed) • Dual hook-and-loop strips (pre-sewn, top + side edge) • Install guide with measuring tips Cable ties or wire for fence mounting are not included — most hardware stores carry them. Install in 4 steps (about 10 minutes) 1. Measure your fence or frame and pick your panel count and size 2. Orient each panel with the smooth face out, quilted face toward the unit 3. Join panels edge-to-edge using the top and side velcro strips 4. Cable-tie or wire the corner grommets to your fence or frame No welding. No custom cutting. No contractor. Made for • Backyard AC noise reduction • HVAC and pool equipment enclosures • Patio and yard privacy walls • Homes on tight lot lines near neighbors • Rental properties (no permanent modification) • Small businesses with outdoor condenser units • RV and mobile home AC units 100-Day Returns If a panel doesn't hold up to weather or doesn't noticeably quiet your unit when installed as a full enclosure, send it back within 100 days for a full refund. Frequently asked questions How many panels do I need for my AC unit? Most residential condensers need 3–4 panels of the 100 x 100 cm size to enclose three sides, leaving the top and one side open for airflow per manufacturer clearance requirements. Which face goes toward the unit? The quilted, padded face goes inward toward the unit. The smooth, glossy face goes outward toward the weather. Can I mix sizes and colors? Yes — panels join via the same hook-and-loop seam regardless of size or color, as long as the edges line up. Will this damage my AC unit or void the warranty? The panel doesn't attach to the unit itself — it mounts to your fence or frame. Always maintain the clearance your AC manufacturer specifies around the unit. Does it affect airflow to the unit? Panels are meant for 3-sided enclosures with the top and/or one side left open. Fully sealing all sides can restrict airflow and reduce AC efficiency — follow your manufacturer's clearance guidelines. Is it machine washable? No — wipe clean with a damp cloth. The coated outer face and padded inner face are not designed for machine washing. What's the warranty and return policy? 100-day returns, no questions asked. Defective or damaged items replaced free of charge. How fast does it ship? Ships in 1 business day. Delivery is 5–12 days depending on your location. Free shipping on orders over $99.