Kobra 245 TS HS-6 Departmental P7 Crypto Cut Shredder, 99.896

Kobra 245 TS HS-6 P7 High Security Continuous Duty Shredder – Soft-Touch Controls & NPSA Rated Why this compact P7 shredder is designed for maximum document security The Kobra 245 TS HS-6 is an ultra-high-security professional shredder designed for government departments, security-conscious organisations and workplaces handling classified, top secret and exceptionally sensitive paper records. Its extremely fine P7 cutting mechanism reduces each sheet into approximately 20,000 tiny particles, providing the highest paper security level defined by DIN 66399. Combining maximum P7 document security with straightforward soft-touch controls, 24-hour continuous duty operation, carbon-hardened cutting knives and Kobra's distinctive heavy duty chain drive with steel gears, the 245 TS HS-6 provides specialist high-security shredding within a relatively compact professional machine. P7 Protection for Classified & Top Secret Documents Security level P7 high security shredding to 0.8 × 5mm particles – designed for classified, top secret and exceptionally sensitive information requiring the highest level of paper document destruction. Reduces each sheet into approximately 20,000 extremely small particles Shreds 3 - 4 sheets of A4 paper at a time Suitable for government, defence, intelligence and other security-critical applications Designed for documents where reconstruction must be made exceptionally difficult Also suitable for destroying film material The deliberately low sheet capacity reflects the exceptionally fine P7 cutting process. This shredder prioritises maximum information security rather than throughput and should therefore be selected according to the sensitivity of the material being destroyed. Approximately 20,000 Particles from Every Sheet The precision 0.8 × 5mm cutting system reduces a single sheet of paper into approximately 20,000 micro-particles, providing substantially finer destruction than conventional P4 and P5 office shredders and a further increase in security over P6 high-security models. Extremely small particles make reconstruction exceptionally difficult Provides the highest DIN paper security classification of P7 Designed specifically for applications where information security takes priority over shredding capacity Cut size exceeds the requirements of the NSA/CSS Specification 02-01 stated by Kobra NPSA Rated for UK Government High-Security Use The Kobra 245 TS HS-6 is NPSA rated and approved for UK Government use, providing a recognised high-security solution for organisations requiring controlled destruction of their most sensitive paper records. Suitable for controlled destruction of exceptionally sensitive information Designed for government, defence and other security-conscious environments Security classification: P7 / F3 24-Hour Continuous Duty for Secure Destruction on Demand 24-hour continuous duty motor – no timed duty cycle or scheduled cool-down period Allows highly sensitive paperwork to be destroyed immediately whenever required Motor thermal protection helps guard against overheating Carbon-hardened steel cutting knives provide durable long-term performance High-precision cutting mechanism produces the exceptionally fine P7 particle size Continuous-duty operation is particularly valuable in controlled environments where sensitive documents should be destroyed promptly rather than retained while waiting for a shredder to cool down. Kobra Chain Drive & Steel Gears for High-Security Reliability A significant advantage of the Kobra 245 TS HS-6 is its heavy duty chain drive with steel gears. Unlike shredders that use plastic gearing within the drive mechanism, Kobra's robust power transmission system uses durable metal components to drive the ultra-high-security cutting head. Provides strong and consistent power transmission to the cutting mechanism Offers increased resistance to wear during demanding professional use Avoids reliance on less durable plastic gearing Supports the demanding P7 high-security cutting mechanism Designed to provide dependable long-term operation in security-critical workplaces This heavy duty drive construction is a distinctive Kobra feature and contributes significantly to the machine's toughness, durability and reliability. Soft-Touch Controls for Straightforward Secure Operation The soft-touch control panel provides convenient access to the shredder's main functions, helping make everyday operation straightforward despite the specialist P7 cutting mechanism. Responsive soft-touch buttons for convenient operation Clear operating-status indicators Automatic start and stop through electronic sensors Automatic reverse in the event of a paper jam Safety Stop system stops the cutting mechanism when the cabinet door is opened Automatic stop when the waste bag is full Energy Smart Power Saving Between Secure Shredding Jobs Kobra's Energy Smart management system automatically places the shredder into power-saving standby mode after a short period of inactivity and incorporates automatic disconnection from the mains for further energy saving. Reduces unnecessary power consumption between shredding sessions Automatically returns to operation when required Keeps the shredder readily available for prompt destruction of sensitive documents 40-Litre Cabinet in a Compact P7 Design Practical 40-litre waste capacity Strong cabinet designed for professional workplace use Mounted on castors for easier movement and positioning Automatic stop when the waste bag is full Electronic door safety system stops the cutters when the cabinet is opened Key Specifications Security level: P7 Cut type: High security micro cut Particle size: 0.8 × 5mm Sheet capacity: 3 - 4 sheets of A4 paper at 80gsm Approximate particles per sheet: 20,000 Feed opening: 245mm Bin capacity: 40 litres Shredding speed: 0.08 metres per second Motor power: 500W Voltage: 230V Shreddable materials: Paper and film Security classification: P7 / F3 Dimensions: 610 × 400 × 360mm (H × W × D) Weight: approximately 29kg Manufacturer article code: 99.896 NPSA rated for UK Government use Maintaining the Ultra-Fine P7 Cutting Mechanism Regular lubrication with suitable shredder oil is particularly important with an ultra-high-security cutting mechanism of this type. Correct lubrication helps maintain cutting performance, reduce unnecessary strain and prolong the working life of the exceptionally fine P7 cutters. Warranty 1-year machine warranty Important back-to-base warranty notice: Kobra operates a back-to-base warranty policy for this model. The cutting head can be detached from the waste cabinet and, if service or repair is required, only the cutting head needs to be returned to the appointed UK service agent in suitable protective packaging. The customer is responsible for arranging and initially paying the return transport cost. This cost will be reimbursed if the fault is inspected and confirmed as being covered by the warranty. We strongly recommend retaining the original packaging throughout the warranty period so that the cutting head can be returned safely if required. Delivery Please allow up to 3 working weeks for delivery. Maximum P7 security in a compact professional shredder. The Kobra 245 TS HS-6 combines an ultra-fine 0.8 × 5mm cut, approximately 20,000 particles per sheet, NPSA-rated security, straightforward soft-touch controls and Kobra's heavy duty chain drive with steel gears for organisations requiring dependable destruction of their most sensitive paper records.