Bilt Hamber - Touch On Ceramic Paint Protection

TOUCH-ON protects your paint while you wash it. You apply it with a pressure washer, pump sprayer, trigger bottle, or bucket, and it leaves a durable hydrophobic ceramic layer on the surface. It runs as your second-stage wash after TOUCH-LESS, so you clean the paint and protect it in one pass. The low-foaming detergency lifts dirt off the panel while the ceramic protection bonds to it. You get real cleaning power without the heavy suds of a normal shampoo. Once TOUCH-ON is down, your paint gains dirt-releasing properties. On your next contactless wash, it works with TOUCH-LESS to shed grime and give you cleaner results with no contact wash needed. TOUCH-ON is water based. It holds no alcohol and no petrochemical solvents, and it is not flammable. It comes in single-dose 30ml sachets and in 1-liter bottles. Key features Durable hydrophobic ceramic protection applied during the wash Cleans and protects paint in a single step Low-foaming detergency for second-stage bucket or contactless washes Adds dirt-releasing properties for easier future washes Pairs with TOUCH-LESS for contactless results Water-based, not flammable, no alcohol or petrochemical solvents Three application methods: pressure washer, bucket, or trigger spray How to use Start with a cool vehicle, out of direct sunlight. Pre-wash with TOUCH-LESS cleaner to clear dirt and contamination. Pick one of these three methods: Pressure washer Add 30ml to the washer or lance reservoir and top up to 300ml with clean, cool water. Shake well. Apply under pressure across the whole vehicle, then rinse straight away with the pressure washer. Dry with a microfibre cloth or an air blower. Bucket Pour 30 to 60ml into a bucket, then fill with 10 liters of warm water, ideally from a fast-running tap. Mix well. Apply with a noodle wash mitt, sponge, or similar. Rinse with clean water and dry with a microfibre cloth. This is not a high-foaming bucket wash. Trigger spray Add 30ml to a trigger bottle and top up to 1 liter with water, ideally deionized water. Shake well. Spray on liberally, panel by panel, then rinse fully with a pressure washer or hose. Dry with a microfibre towel or air blower. Do not let the car air dry, or water spotting may occur.