Smith’s WB Marking Paint DIRECT SHIP ONLY

Smith’s WB Marking Paint is a ready-to-use, high solids, fast curing, waterborne polymer ceramic solid color marking paint with a slightly textured finish that offers a low odor product with fast return-to-service & good opacity even at thin coats. Yields a slightly textured, low sheen solid color finish. Applies with a paint roller / brush or a sprayer then air dries within 1 to 2 hours for full traffic at 72°F (22.2°C). RECOMMENDED USE: Interior or Exterior Line Striping Pest Control Inspection Areas Demarcation lines Curbs Floor Markings Airport tarmacs SUBSTRATES: Concrete Well bonded, properly prepared coatings & industrial floor paints *Test for compatibility over existing fully cured paints / coatings. Apply within previous layer product recoat window unless sanded dull then cleaned for application over resinous or low permeability coatings Asphalt walking paths or parking lot lines CMU & Cinder Block Walls Brick & Pavers HIGHLIGHTS: Fast Air Dry & Return-to-Service, even at 50°F with high air humidity (with up to 90% Ambient Humidity at time of application) Durable – Accepts Forklift & Pallet Jack traffic within a few hours Single Component – Ready-to-Use & Easy to Apply Excellent U.V. Stability – Interior or Exterior Applications Long Recoat Window – Allows recoating of subsequent layers or as soon as firm set or for up to 4 days after initial application Moisture Resistant once walkable Non-Flammable, Slight Odor & Low VOC’s – Use in all regions Tenacious early & long-term adhesion to a variety of substrates May be applied up to 30 mils WFT in a single layer Temperature resistant up constant 150°F Good Opacity with 2 coats Holds crisp tape line edges – Good bleed through resistance Soap & water clean-up while wet Meets Federal Specification TT-P-1952F Type III