Td27, Bd30, Qd32 gearboxes + KIT 4° VW 1.9tdi, 1.8t Adapter

Swap adapter for connecting VW 1.9 TDI/1.8T engines to following nissan gearboxes: Terrano 1 td27 73kw Terrano 2 td27 96kw Navara d22 td25 (nissan engine TD series) Patrol k260, k160 TD27 Elgrand td27, qd32 Trade bd30 Cabstar td27, bd30 Atleon Bd30, td27, qd32 Pathfinder r50 qd32 Pathfinder wd21 td27 Double cab d21 td25 non turbo King cab d21 td25 non turbo Navara d22 td25 73kw gearbox Note: The adapter-to-engine angle is 4 degrees. The VW starter has been slightly moved higher so that it fits neatly into the Nissan gearbox bellhousing, eliminating the need for extensive nissan bellhousing cutting. The adapter-to-gearbox angle, or starter position can be adjusted upon request, free of charge. Feel free to contact us via info@jncswap.com. The adapter is compatible with: 1. The 240 mm single-mass Valeo VAL835026 clutch kit (or an equivalent kit from brands such as Ridex, Sachs, etc., which are aftermarket conversion kits for dual-mass flywheels) can be used with a Nissan clutch disc and the Audi/VW 068911024H starter with a shortened bellhousing. A 10 mm thick crankshaft spacer should be installed between the crankshaft and the flywheel. To compensate for the spacer, the starter bellhousing must also be shortened by 10 mm. 2. You can also use the 240mm dual-mass flywheel - Sachs 2294 002 198 flywheel with a nissan friction disc, a VW pressure plate. A 10 mm thick crankshaft spacer should be installed between the crankshaft and the flywheel. To compensate for the spacer, the starter bellhousing must also be shortened by 10 mm. The adapter is compatible with the following engines: The distance between the vw engine centralisation pins is 306 mm. VE pump 1.9tdi: 1Z, AHU, AGR, AHH, ALE, ALH, AFN, AHF, ASV, AVB, AVG (These engines can be rebuilt into fully mechanical "MTDI" engines.) etc... PD (pumpe duse) 1.9tdi: BSU, BRU, BXF, BXJ, ANU, ATD, AXR, BEW, BMT, AVB, AVQ, BSW, BJB, BKC, BLS, BSV, BXE, BPZ, AJM, ATJ, AUY, BVK, AWX, ASZ, AVF, BLT, ARL, BTB, BPX, BUK, etc.. 1.8t: BEA, AWT, ARX, ARZ, AWC, BJX ,BAM, APX, AMK, BVR, AJQ, AJL, APP, BBU, APY, AUQ, BEX, AYP, AVJ, ADR, AMB, AMU, APT, APU, ARG, ATC, ATW, AWM, AWP, 1.8i non turbo engines, etc... The package includes an adapter plate and 5 conical-head screws. The adapter has all 4 holes for the dowel pins.