2018–2022 Honda Accord 8" LCD + Touch Screen Replacement – MAP / Navigation Version | C080EAB02.0

Restore the factory display and touchscreen in your 2018–2022 Honda Accord without replacing the entire OEM radio assembly. This Cuescreens complete LCD + touch screen display replacement is designed specifically for select 2018–2022 Honda Accord factory infotainment systems equipped with the MAP / Navigation version. IMPORTANT: THIS IS THE MAP / NAVIGATION VERSION. IT IS NOT COMPATIBLE WITH THE CLOCK VERSION. The 2018–2022 Honda Accord was produced with two different display configurations: MAP and CLOCK. Although the systems look very similar, the screens are not interchangeable. Before ordering, confirm that your original factory radio is the MAP version and compare the part number and connector configuration with the photos in this listing. Complete LCD + Touch Screen Assembly This is not just a replacement outer touch glass. It is a complete LCD display + touchscreen assembly designed to replace the original C080EAB02.0 display used in compatible Honda Accord factory navigation systems. If the failure is within the original display assembly, this replacement may correct problems including: Cracked or shattered display glass Unresponsive or partially responsive touchscreen Ghost or phantom touch inputs Dead areas of the touchscreen LCD lines or display distortion Dead pixels Faded, discolored, or damaged LCD image Scratched or damaged screen surface Polarizer or screen-layer deterioration This allows you to repair the original factory infotainment system rather than replacing the entire radio or center display assembly. MAP VERSION ONLY – PLEASE VERIFY BEFORE ORDERING 2018–2022 Honda Accords may use either a MAP version or a CLOCK version. This listing is ONLY for the MAP / Navigation version. ✓ Your original unit should be the MAP / Navigation configuration ✓ Verify LCD part number C080EAB02.0 when possible ✓ Compare the connectors and back of your original screen with our listing photos ✕ Do not order this screen if your vehicle uses the CLOCK version If your factory display has a CLOCK configuration instead of MAP, this is not the correct replacement. Because multiple infotainment configurations were used within the same model years, year, make, and model alone should not be used to determine compatibility. Vehicle Fitment Honda Accord 2018 2019 2020 2021 2022 For vehicles equipped with the compatible factory MAP / Navigation infotainment system. Universal fitment: No LCD Part Number C080EAB02.0 C080EAB02-0 We strongly recommend confirming this number on your original screen whenever possible before ordering. Compatible / Reference Radio Part Numbers 39710-TVA-A210 39710-TVA-A220 39710-TVA-A230 39710-TVA-A230-M1 Additional searchable formats: 39710TVAA210 39710TVAA220 39710TVAA230 39710 TVA A210 39710 TVA A220 39710 TVA A230 Part numbers are provided as compatibility references. Always verify your original hardware before installation. Why Replace the Screen Instead of the Entire Radio? A damaged LCD or failed touchscreen does not necessarily mean the entire factory infotainment system needs to be replaced. The radio electronics, audio system, navigation hardware, Bluetooth functions, and other components may still be operating normally while the LCD or touch layer has failed. Replacing the display assembly allows you to retain your original factory system while repairing the failed component at a fraction of the cost of replacing the complete infotainment unit. Designed for Your Original Honda System Cuescreens specializes in automotive touchscreen and LCD replacement components. This replacement is designed to install into the original compatible Honda Accord display assembly while retaining the vehicle's factory radio and infotainment system. No aftermarket radio conversion is required. Professional Installation Recommended Installation requires removal and disassembly of the factory display assembly. Automotive electronics and ribbon connectors can be damaged if improperly handled, so professional installation is recommended for customers who are not comfortable working with infotainment electronics. Cuescreens has a nationwide network of professional installers available through our installer locator at Cuescreens.com. Important Diagnostic Information This product replaces the LCD and touchscreen display assembly. It does not replace the complete radio or infotainment control electronics. A replacement screen will not correct problems caused by an upstream radio, power supply, wiring, communication, software, or infotainment module failure. If your original screen does not power on at all, we recommend diagnosing the system before assuming the LCD assembly is the cause. What's Included 1 × Cuescreens LCD + Touch Screen Display Assembly MAP / Navigation Version LCD Part Number: C080EAB02.0 No complete radio, bezel, control panel, or head unit is included unless specifically shown and stated in the listing. Warranty 2-Year Manufacturer Warranty Unlimited Warranty Upgrade option available. Cuescreens The Leader in Automotive Touchscreen Replacement Instead of replacing an entire factory infotainment system because of one failed component, Cuescreens gives vehicle owners and professional installers a practical way to repair the original system. Restore the screen. Keep the factory radio. Get your Accord looking and functioning the way it should again.