$499.99 Ceramic Coating + Polish

IF YOU NEED HELP CALL US NOW +18328750925 BENNY ATTENTION PAYMENT CAN BE MADE AFTER CERAMIC COATING JOB IS DONE Absolutely! Here’s a clean, professional step-by-step ceramic coating process you can use for customer education: 🚗 Ceramic Coating Process 🧼 Thorough Vehicle Wash Remove dirt, road grime, grease, and contaminants from the vehicle’s exterior. 🧽 Chemical & Iron Decontamination Remove embedded contaminants such as iron particles, brake dust, tar, and other bonded debris. 👐 Clay Bar Treatment Clay the paint to remove remaining surface contaminants and leave the paint smooth and clean. ✨ Paint Inspection Inspect the paint under proper lighting to identify scratches, swirl marks, oxidation, and other imperfections. 🔧 Paint Correction Polish the paint as needed to remove or reduce imperfections and restore gloss before coating. 🧴 Panel Prep / Surface Prep Wipe down the entire vehicle with a panel-prep solution to remove polishing oils, waxes, and residues. 💎 Ceramic Coating Application Apply the ceramic coating one section at a time using the manufacturer's recommended application method. ⏱️ Flash & Level the Coating Allow the coating to properly flash, then carefully level and remove excess product to achieve an even finish. 🔍 Final Inspection Check every panel for high spots, streaks, or missed areas and correct them before curing. 🌡️ Curing Process Keep the vehicle protected from water, dirt, and contamination while the coating cures according to the product manufacturer's instructions. 💦 Final Result Once properly cured, the coating provides a glossy finish, hydrophobic water behavior, easier maintenance, and an added layer of protection for the paint. Important: Ceramic coating works best when the paint is properly cleaned, decontaminated, and prepared beforehand. Proper surface preparation is one of the most important parts of the entire process.