Cabin Air Intake Guard for Tesla Model Y Juniper / Model Y L / Model 3

TESSTUDIO · FRUNK DEBRIS PROTECTION Stop Leaves and Debris Before They Build Up in the Frunk Drainage Area A model-specific cabin air intake and drainage guard that covers exposed frunk-side channels to help keep leaves, pine needles, dust and small debris away from harder-to-clean areas. Debris Barrier Helps block leaves and pine needles Model-Specific Fit Separate versions by vehicle Tool-Free Install Align and insert into position Removable Design Easy access for cleaning A SMALL BARRIER FOR A MESSY PROBLEM Keep Debris on Top Instead of Letting It Drop Deeper Open drainage areas can collect leaves and debris where cleaning becomes inconvenient. The guard adds a removable protective layer over the exposed channel. 01 Intercept Larger Debris Helps stop common leaves, pine needles and other loose material before they settle deeper around the drainage area. 02 Make Cleaning Easier Debris stays closer to an accessible surface instead of collecting in narrow factory recesses. 03 Keep the Frunk Area Tidier Adds a cleaner visual finish around the side drainage and air-intake area. Designed Around the Factory Frunk-Side Openings The guard sits around the exposed side areas near the hood hinges and drainage channels rather than covering the main frunk storage space. Protection Where Leaves Naturally Collect Wind, rain and parking beneath trees can carry debris toward the narrow areas beside the frunk tub. The fitted guard creates a broader surface over these openings while maintaining the vehicle-specific surrounding geometry. Fits around factory hood-hinge areas Follows model-specific frunk contours Does not occupy the main frunk cargo area Designed to look integrated after installation Built to Catch the Debris Tesla Owners See Most Often Trees, dusty parking areas and daily outdoor driving can all introduce material into exposed front-trunk drainage areas. Leaves, Needles, Dust and Small Debris The broad guard surface covers exposed openings and helps keep larger foreign material from falling directly into harder-to-reach drainage recesses. Helps block fallen leaves Helps catch pine needles and catkins Reduces direct entry of dust and loose debris Helps keep drainage areas easier to inspect NON-DESTRUCTIVE INSTALLATION No Drilling. No Wiring. No Permanent Modification. The model-specific pieces are designed to align with the factory area and insert directly into position. Install Without Taking the Frunk Apart Position the correct left and right guard pieces over the matching factory areas and press them fully into place. No drilling required No electrical connection No adhesive required for normal installation Removable for cleaning and inspection Clean the Guard Instead of Digging Debris Out of Narrow Gaps The removable design helps move routine cleaning to a surface that is much easier to reach. Remove, Clean and Reinstall When dirt and leaves collect on the guard, remove the piece for a more thorough clean and reinstall it once dry. Accessible top-side cleaning Removable for deeper washing Reduces debris buildup in difficult gaps Reusable after routine cleaning Made for an Area That Regularly Sees Rainwater The guard is installed around a part of the vehicle that naturally encounters rainwater and exterior debris. Maintenance reminder: The guard helps screen larger debris but does not eliminate the need to inspect the frunk drainage area. Periodically remove leaves, dirt and other buildup and confirm that factory drainage paths remain clear. FITMENT MATTERS Different Tesla Models Use Different Guard Geometry Select your vehicle from the product selector rather than assuming the same guard shape fits every Model 3 or Model Y. VEHICLE OPTION 01 Model 3 Current selector: Model 3 (2023–2025.09). Confirm your vehicle production period before ordering. VEHICLE OPTION 02 Model Y Juniper Current selector: Model Y Juniper (2025.03+). Choose the Juniper-specific guard shape. VEHICLE OPTION 03 Model Y L Current selector: Model Y L (2025.11+). Choose the Y L-specific version. Before checkout: The guard geometry varies by vehicle. Check the selected model option and compare the installation images with your frunk area before ordering. Shaped Around the Vehicle — Not Cut From a Universal Sheet Each version follows the surrounding hood-hinge, washer and drainage-area geometry of its intended vehicle. OEM-Style Coverage The molded shape works around existing components rather than relying on a flat universal mesh or loose trim material. Vehicle-specific left and right geometry Pre-shaped openings around factory components Black finish blends with surrounding frunk plastics No cutting or trimming during normal installation Install in Four Simple Steps A straightforward fitment designed for owners who want protection without modifying the original vehicle. STEP 01 Confirm Fitment Select the exact Model 3, Model Y Juniper or Model Y L version. STEP 02 Clean the Area Remove existing leaves, dust and debris from the frunk-side channels. STEP 03 Align the Guards Match the left and right pieces with their corresponding factory areas. STEP 04 Press Into Place Insert each guard fully and confirm that it sits securely and evenly. Product Details Brand Tesstudio Product Type Cabin air intake / frunk drainage debris guard Model 3 Fitment Model 3 (2023–2025.09) — select exact option Model Y Juniper 2025.03+ Model Y L 2025.11+ Main Function Helps screen leaves, pine needles, dust and small debris from exposed frunk-side drainage areas Installation Direct-fit, tool-free, non-destructive installation Cleaning Removable for routine cleaning and washing Vehicle Included No Frequently Asked Questions What does the cabin air intake guard actually do? It adds a removable barrier over exposed frunk-side drainage and intake areas to help prevent leaves, pine needles, dust and other loose debris from falling deeper into narrow channels. Which Tesla models does it fit? The current product selector includes Model 3 (2023–2025.09), Model Y Juniper (2025.03+) and Model Y L (2025.11+). Select the exact vehicle version before ordering. Is the same guard used for all three vehicles? No. The surrounding frunk and drainage geometry differs by vehicle, so the guard shape varies between model options. Does installation require drilling? No. The current product design uses non-destructive direct installation without drilling, wiring or permanent vehicle modification. Is adhesive required? The current installation design is intended to align and insert directly into the corresponding factory area without permanent adhesive. Will it stop every piece of dust or debris? No physical guard can prevent every fine particle. Its main purpose is to reduce direct entry of common larger debris such as leaves, pine needles, catkins and small loose material. Will the guard stop water from draining? The product is designed around the factory drainage area rather than as a sealed waterproof cover. Routine inspection is still recommended to make sure factory drainage paths remain clean and open. Can I remove the guards for cleaning? Yes. The guards are removable so accumulated dirt and debris can be cleaned from both the guard and the surrounding factory area. How often should I clean the area? Cleaning frequency depends on where the vehicle is parked. Cars regularly parked beneath trees or in dusty environments should be inspected more often. Is this useful if I usually park indoors? It can still help reduce debris entering the exposed area, although the benefit is greatest for vehicles frequently parked outdoors, beneath trees or in areas with leaves and airborne debris. Does the guard interfere with normal frunk storage? The guard installs around the side drainage and hinge areas, outside the main central frunk cargo compartment. Can the product be removed later? Yes. Because installation is non-destructive, the guards can be removed for maintenance or returned to the original configuration. Is this an official Tesla product? No. This is a Tesstudio third-party accessory designed for compatible Tesla vehicles. Build a Better-Protected Front End Pair the drainage guard with other Tesstudio upgrades that focus on front-trunk usability, sealing and debris protection. FRUNK UPGRADE Front Trunk Electric Suction Soft-Close Lock Add a controlled soft-close action to compatible Model 3, Model Y Juniper and Model Y L frunks. SEALING & PROTECTION Car Door Seal Kit for Model 3 / Model Y Add custom-fit rubber sealing around key vehicle areas to help reduce dust intrusion and wind noise. MODEL Y JUNIPER · FRONT PROTECTION ABS Front Grille Mesh Insert for Model Y Juniper Add a honeycomb barrier ahead of the cooling area to help intercept insects, leaves and small road debris. Shop Tesla Protection Accessories Tesla and related model names are referenced solely for compatibility identification. Tesstudio is an independent accessories provider and is not affiliated with or endorsed by Tesla, Inc. Confirm the selected vehicle model and production period before ordering.