22.2V 16000mAh 6S LiPo Battery, 18C, XT90S

PCEONAMP 22.2V 16000mAh 6S LiPo Battery for Industrial Drones – 18C Continuous / 36C Peak Discharge, XT90S Anti-Spark Connector Built for heavy-lift and long-endurance industrial drone missions, this 6S 16000mAh LiPo delivers 364.8Wh of energy with a 18C continuous (288A) and 36C peak (576A) discharge rating, giving you extended flight time without sacrificing burst power during takeoff or evasive maneuvers. Key Specifications: • Cell Configuration: 6S (6 cells), 22.2V nominal (3.7V/cell), 25.2V full charge (4.2V/cell) • Capacity: 16000mAh / 364.8Wh • Continuous Discharge: 18C (288A) | Peak: 36C (576A) • Dimensions: 190 × 73 × 60 mm / 7.48 × 2.87 × 2.36 in • Weight: 1743 g / 61.48 oz • Main Connector: XT90S Anti-Spark (low contact resistance, safe plug-in under load) • Balance Connector: JST-XH 7-pin • Power Wires: 8AWG silicone, heat-shrinked • Outer Wrap: Hard PVC shrink wrap, vibration-resistant, IP-rated for field use • Chemistry: LiPo (standard 6S 3.7V/cell) Compatibility & Safety: ⚠️ This is a STANDARD 6S (3.7V/cell) LiPo. Do NOT use in 4S, 8S, or HV 6S (3.8V/cell) systems. Verify your ESC, charger, and frame battery bay (minimum 190 × 73 × 60 mm) support standard 6S 22.2V before ordering. What's in the Box: • 1 × PCEONAMP 22.2V 16000mAh 6S LiPo battery (XT90S plug) • 1 × JST-XH 7-pin balance lead Note: Some product images are AI-rendered for illustration. The actual product may vary slightly in appearance. Please refer to the specifications above for exact dimensions and features.